Tzygä

Great pic OpenDot thanks! Did you drill first one side hole and then shoot you gun and after that decided to drill second hole or did you just drill both side holes at the same time? If you drill first one side hole which one did you drill first (first port or middle port)? Nice slide you have OpenDot how wide are your slide holes and how far a part they are if I may ask? They are 90 degree angle for the slide right. Do you have more pictures for you nice open gun somewhere here in this forums? If it need side holes I was thinking drilling one side hole for the middle port and do some shooting after that. Is there difference for if I drill side hole in front of the port or in the middle of the port or in the end of the port where I decide to drill side port. Thank you for you answer I ask because I don't want to ruin my comp.

Welcome aboard!

Welcome aboard!

Welcome to the forums!

How much it weights?

Nice video user293. Ivipscshooter I also have Schuemann Hybri barrel with no hybri ports and I am shooting 9 major load using VV 3N38 powder. Currently I am using Bedell titanium comp but I like to have little bit bigger first port. Have you drilled any side ports for the comp or did it works just great without them? Thanks you for your answers.

I would like to know if any have tried new Schuemann compensator? And how you like it? http://www.schuemann.com/store/tabid/78/c-799-compensators.aspx

Welcome aboard!

Good luck! Welcome!

Welcome!

Welcome!

Welcome!

Welcome to the forums!!!

Welcome to the forums!!!

Welcome to the forums!!!

Welcome!

Hello Randy and welcome to the forums! Good luck for the match!!!

Thanks mpolans. I put that in General Gunsmithing forum . This can be removed from here now.

I was shooting with my STI .22 conversion kit and firing pin just fly out of the firing pinhole. How I can get firing pin back to the firing pinhole and get it stay there? There is no firing pin stop plate to hold the firing pin in the hole. Now firing pin won't go in the whole way. It stay out little bit. In the firing pinhole there is little jut/lump/pin and in the firing pin there is hole but you can't twist the firing pin to get around the jut/lump/pin in the hole. Please is there anybody who will how to do it?

I was shooting with my STI .22 conversion kit and firing pin just fly out of the firing pinhole. How I can get firing pin back to the firing pinhole and get it stay there? There is no firing pin stop plate to hold the firing pin in the hole. Now firing pin won't go in the whole way. It stay out little bit. In the firing pinhole there is little jut/lump/pin and in the firing pin there is hole but you can't twist the firing pin to get around the jut/lump/pin in the hole. Please is there anybody who will how to do it?

Welcome to the great site!

Welcome to the site!

Welcome!

Welcome to the forums!

Nice to have you back! Welcome to the site!