norbs007
-
Posts
2,098 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by norbs007
-
-
Thoughts on the henning grips?
I like it... it's between the stock wood and the Xtreme, fills my hand better than my Xtreme but got no issue using either one.
-
I'll play...
-
Thank you... picking up one.
-
Briley's are threaded longer. We have had to re-thread a few barrels so they would accept the briley chokes. Carlson's will screw in no problem.
Thanks for the info... should've gone with the Carlson's then.
-
FYI there will be a little gap between the choke and the barrel. Are you screwing it in with the choke wrench? With lube? Take a picture of it in the gun. All mine say INV for invector
Thanks for the quick reply, I was using the MKA wrench but also have the Briley. It was getting tight and I don't want to mess up the threads as you can see in the picture it already marked the Briley past the thread. I will take a picture how far down it screws. Thanks again!
-
It was mentioned to use Win Chokes for the MKA and I went with the Briley extended. It does not screw all the way down due to the longer thread. Is this the right choke? I was also told to get the one marked INVX2 which is the Browning (Invector). If somebody can please confirm. Thank you.
-
I just ordered one for a Lim Pro from Blade-Tech, I use one for my Stock II and my Lim Pro doesn't quite fit right... it will work, but not the right fit. Blade-Tech will mold one for an exact fit.
-
I've asked for a 0.140" X 0.100 sight. We'll see if they make it.....
I also emailed them that I need 4 if they'll make it, we shall see...
-
8.0gr 10 round average PF 171.8
Used the same load before @ 1.170", it does average around 170pf.
-
With a Stock II I am running 147gr on 3.3gr of N320 or Ramshot Competition @ 1.100", cannot feel any difference between the two powders and both average 130pf.
-
Looked into it myself and decided on sending an MKA 1919-XN to Matt at Tooth & Nail. Currently running a 15% discount for Father's Day.
-
There'll be more to come and hopefully prices will go down more. Thanks for looking out though!
-
Highlander, watched it so many times I had it memorized end to end at one point :-)
-
Who sells an LM choke for it?
Another vote for Carlson chokes. I like the way they are labeled so you can easily grab the right choke out of your case.
Cool, I like the extended chokes. Thanks!
-
Briley. They say INVX2 on them.
Nice... thanks!!!
So, the Browning Invector chokes then.
http://www.briley.com/browninginvectorextendedblackoxidex2choke.aspx
-
Who sells an LM choke for it?
-
That looks awesome! Need to get mine done... thanks for sharing!
-
Good thread, just picked up one too... can't wait to see your hack job ;-) Please do share.
-
Plus one with Ramshot Competition, same charge and feel as N320 for 9mm minor.
-
Look up some loads for n320. It is the same in my testing.... 4.1gr 1.1-1.130 OAL 124gr
What he said...
-
Limcat DragonCat
MG 124gr JHP over 10.1gr 3N38 @ 1.235 OAL
-
You don't have to modify the grip. At least I never did the two times I fit an SV bow. Like 10 minutes with a file on the trigger base and it's in.
This!
-
Wow!!! I still have the original ULMOS in one of my guns and have a spare one that I was considering to sell for $100 two weeks ago. Guess I am keeping it considering the cost to replace it.
-
Started with USPSA back in 1994 and I knew it then that I will be doing it for the long haul. Wasn't expecting any benefits for being a lifer, not having to renew for life is just a bonus!
Stock II vs. Limited Pro
in Tanfoglio (EAA / IFG)
Posted
Love mine as well for the exact reason... just finished the trigger job on my S3 and will compare that with the Limited Pro.