bchibb

Do not order from from Sniper Company unless you are OK with a charge on your credit card within 24hrs and not getting your order filled until weeks/months/or maybe never?????????? Don't know!!

Thanks, I have already received what I needed. Took less than a week and it wasn't from SNIPER COMPANY. Ordered on Mon AM/received on Thur AM with free shipping. That's called customer service!!!!!!

I fear that's the same thing I have seen else where. If you have not already done so, contact your CC company. It has been the absolute worst online buying experience I have ever had. They try to sell you something they don't have and then order it from a supplier. You are now at the supplier's mercy. You might get your order (maybe) in 10 or so days, a month or 2 or 3 or who knows? When you place an order it appears it is in their inventory. My credit card was charged the next day! When you start to inquire, you can not get anyone to answer the phone and you cannot get an honest answer on their forum. I ended disputing the credit card charge and told them I was going to do this. It didn't make any difference, they were to busy with other matters to respond. DO NOT ORDER from SC

I placed an order with them on 11/22 and was given an estimated delivery date of 11/28. I have been told 2 times that my order was shipped and I would get tracking info. I have received nothing and it has been over 3 weeks. My credit card was charged the next day after placing the order.

Has anyone has any experience with online ordering from SC?

What military surplus powder can be used for 300wm and 308 that produces good results? Also for 260 Rem.

After reducing powder charge the pressure signs have diminished. I am now at the min. charge per the sierra manual. Will chrono the rounds to see what vel I am getting. Thanks for all of the replies.

I am looking for an ankle holster for a G26 and am open for suggestions. Thanks

Low recoil, very accurate, try the 155 Palma.

Has anyone tried this powder in a .300wm. I have found some locally for $72.00/8lbs? It is being advertised to be good for rifle mag cal., 7mag. and 300wm.

Using H4350 with Sierra 155, 175 and 180 MK. Different charges of powder with same results as far as extraction issues. This is in a 24" m700 5R gun.

I'm reloading once fired brass and after firing they are hard to extract. I'm full length resizing with a Forster die. They chamber just fine. I measured the case just above the belt after firing and they are growing in diameter from .505/.510 to .514. I have measured them after resizing at .510 and they chamber OK again. I'm wondering if I am bumping the shoulder too much and causing them to headspace on the belt instead of the shoulder? Should I back the sizing die out some and see if the problem goes away?

I'm using 155 PALMAS in all of my .308s (TRG, XM3, AR10) with excellent results.

If you go with an auto, go with a 391 Beretta. I've had 2 Browning Golds and both had cycling/FTE problems. One went back to Browning 2 times the other 1 time and the problem never got solved. Sold both and moved on to Beretta. I now have 3 391s (one .20 & 2 .12), a 3901 and an Extrema.

Eezox works great in extreme cold conditions. It does sound like a lube problem due the cold wx.