[Powder sticking inside powder tube]

Thanks Barry, just curious because this never happen to my other 3 calibers set up with older powder tube.

[Powder sticking inside powder tube]

HI,

I have a new Powder Tube for my 550B, and noticed that powders are sticking inside the tube, a little annoyance when changing powders, . Any remeby for this,

[What locking holster for 2011 for 3 gun?]

Thanks Phil for your feedback on the 014.

[STI Trubor.....9mm or 38 Super ?]

Been shooting 38 super before moving to Canada, back then the lost brass is not a concern, all clubs has its own brass boys ( like golf caddies), regardless of the match level, so expect 95% of your brass will be back after shooting the stage. In Canada, Since labor is expensive here, I switched to 9 major, just used IF $35/K. I only picked up my fired brass during my practice shoots at my local range, my 9mm brass ilfe cycle is between 5-6 reloads. after that will use for my Classic loads.

[What locking holster for 2011 for 3 gun?]

so the Safariland 014 is not recommended?

[safariland 068/ghost pro8]

Couple of questions - Safariland 068 caddy- twin load okay? or just for quads, likes the retension feature

Pro8- ELS compatible?- like the price

[299,999.....Happy Birthday Benelli]

I would think it would be unreasonable to expect less than 250,000

thats a very assuring assurance , thanks

[299,999.....Happy Birthday Benelli]

So is it reasonable for me to expect my M2 will handle 50k, of course with some minor parts replaced like springs. nothing major?

[M2 compact stock]

Steve,

Just a follow up question, is it True that gel pad are not interchangeable between the Standard and the Compact model ? Thanks

I would say that is true. As the stock gets longer the top to bottom (toe to heel) area of the stock at the butt also is longer (think of the triangle shape of the stock).

Thank you very much sir

[M2 compact stock]

Steve,

Just a follow up question, is it True that gel pad are not interchangeable between the Standard and the Compact model ? Thanks

[M2 compact stock]

Hi

Are all the comfortech stock compatible to all reveivers, somebody in the other forum is selling is M2 Compact Comfortech stock which comes from his compact M2, want to install it to my M2 Field 21"bbl

[Caspian Race Ready frame, Classic legal?]

thanks Eric, I guess Caspian Frames race ready or their traditional 1911 are not that popular in the Classic/ SS divisions, or has Caspian lost its market share in the 1911. When I started shooting 25 yrs ago, Caspian slides and receivers is the best choice for rebuilding or custom builds.

[Caspian Race Ready frame, Classic legal?]

Hi

Will this frame fit in the IPSC box? How about the width less than 35mm?(magwell area)

Planning to use their frame for Classic Division (Ipsc) thankd

[unloading M2- a Pain]

But you have a shorten lifter, I'm using a Taran , you really have to push down the lifter to release the shell. Sometimes I just unload by pressing the shell release and cycle the action.

[unloading M2- a Pain]

BE Benelli Unload.mov

thanks for that video, any slow mo

[unloading M2- a Pain]

Thanks to all the your feedbacks guys, Steve Rose gave me a quick and easy advice on how to finely tune the shell catch by just removing the trigger assembly without taking out the shell catch from the receiver, Thanks you Mr. Rose for the help.

[unloading M2- a Pain]

Tom, maybe you can develope a shell catch - spring loaded/ and or 2 piece, same as the 1301, same idea as Aftec in the 1911,

Easier to load/ unload

[unloading M2- a Pain]

just a follow up, I did a little polishing and bending to my Shell Latch, first try I got an occasionnal release of the shell from the mags,although the insertion is more smooth, Readjusted the Shell Latch to put more Tension, much smoother than the factory but I can feel more resistance .

Does anybody sells a "Tune Shell Latch"

[unloading M2- a Pain]

Sorry , wrong choice of words, lol, thanks

[unloading M2- a Pain]

Yeah I was thinking of doing that, press the shell release and rack the bolt, just a little concern , will it ruin or mar the extractor groove of the shell?

[unloading M2- a Pain]

Unloading my M2 ( shells from the mag) is a real pain, its a struggle by pressing the shell catch even with a the factory lifter. Now that I installed a Taran Lifter it makes the unloading manually more worse, correct me if Im wrong ,but the Taran"s lifter looks a little bit longer the factory lifter.? Sometimes when unloading the shells and had already pass thru the sheel catch, it will hit the edge of the Taran Lifter, Is it safe to trim or cut a little materials on the Taran lifter? , Thanks

[S.Nova/ slug - shots]

The slugs are hitting dead on, so need to change the front sight I believe , the shots are grouping on the left side , moving the front sight more to the right will just make my shots more on the left.

[S.Nova/ slug - shots]

Is this common?

SG- Super Nova-

ammo- Winchester Target 7.5, 1 1/8 ounce,2 3/4 drum

Pattern is more on the LEFT SIDE ( 3-4 inches), ELEVATION IS FINE EXCEPT FOR THE WINDAGE. , chokes used , LM and IM (distance 30 yrds)

but the slugs sho0ts at POA

Federal Truball Light recoil -Dead Center at the same disatance @ 30 yrds.

S&B light recoil- zero windage , 1/2" high @ 30 yrds

Never had a chance to try other shots yet.

Feedback please, thanks

[3GUN super black eagle?]

Its my next project as well, here up North where we are limited to 5 rnds, ( 5.9) the SBE will make more sense, an extra 1 rnd than a 3" chamber SG, . My other other alternative is the Stoeger 3500 in 24" a less expensive option.

[1301 Endurance/ Parts Failure]

ffgats,

I have been running a 1301C for about 2 years now and had my first parts failure on Saturday, at least it was the weekend before the match... The right side hammer strut broke right where it goes into the hammer spring. The left and right side hammer struts are different from each other and I am wondering if the right side fails more often than the left. Brownells has the right side strut on backorder but the left side was available I have 2 of each and the hammer strut bushing on order. The few Beretta service centers I have contacted did not have this part in stock either. This shotgun probably has about 3K rounds through it. The good news is a good friend was nice enough to loan me his trigger group for the match. So I will have hammer struts in my parts kit along with all the springs and the piston O-ring.

Hope this helps,

Jeff

I hope they will sell the parts individually , and not to force us to buy the complete trigger assembly, lol

Next year my 1301 will not be as over use since my son bought me a Supernova as our family second SG.

thanks for the info Jeff