ffgats
-
Posts
503 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by ffgats
-
-
Hi,
Its been awhile since this particualr comp have been talked about.
Any latest experience on this comp for 9major. please include the specs of your gun and load eg.like if bbl is ported.
thanks
-
The Micro came into my mind because of its durability, although I find the Field of View a little cute,lol. and of course the price is a little bit on the higher side. My only concern about the RTS is considering its new to the market is its reliability, and since it automatically self adjust to the outside light maybe somebody can share more on this aspect.
I will to contact Cmore if I can just send my sight From Canada to them directly, or I need an export permit,
Thanks for the feebacks gentlemen
Contact freedom ventures, they are the canadian distributor ect for c-more
I already did, need to contact Cmore directly for return Authorization #
-
Hi people !
I finally bit the bullet and fit a RTS + Cheely mount on my trusty SV blaster.
I like it ! No problem finding the dot even in the weak hand standards, improved overall balance (I used to run a "sort of 45°" Barry mount), seems like a good piece of kit.
Let's hope it stands the test of time... A backup is on the "to buy" list just in case.
Will keep you posted.
Cheers
Austin P
hows the dot transition from low light to sunny/brighter enviroment. I understand it self adjust according to the light condition?
thinking of getting one too.
thanks
-
I have the same problem,the elevation adjust ment screw will shift after +- 300 rnds, Tried applying a nail polish on my locking screw, still same problem. the correct zero for my sight is when the elevation screw is at the 10oclock position, after 300+- rnds the elevation screw is at 7oclock position.
-
The Micro came into my mind because of its durability, although I find the Field of View a little cute,lol. and of course the price is a little bit on the higher side. My only concern about the RTS is considering its new to the market is its reliability, and since it automatically self adjust to the outside light maybe somebody can share more on this aspect.
I will to contact Cmore if I can just send my sight From Canada to them directly, or I need an export permit,
Thanks for the feebacks gentlemen
-
Hello,
For the last couple of months my Cmore mounted on my 9mm major open gun,s not holding its zero, every 500 rnds,need another zeroing. the elevation adjustment have shifted. This cmore have seen a lot of rounds. I planning of changing it to the RTS model which still a cmore, or the Aimpoint micro.
Any experienced on RTS's durability, the abiltiy to hold and ease zero, and dot visibility/clarity
My second option is the Micro series, I have this sight on my AR and its just perfect for me, durability, ease of zero and dot visibilty.
Your feedback would be highly appreciated
-
Ive been using this projectiles for almost 1 year (4k) unfortnately our supplier had a hard time restocking them, went back to Zero. Never had a problem with it, pushing this projectile up to 1380 fsp. oal 1.200 to my gun.
-
I stand corrected, Its BHF. Just want to make sure I paid for the item as claimed to be. and besides the bbl was not that cheap,have no choice its the only one availiable. thanks for the info.
-
Good Day ,
I bought a 11.5 bbl from a friend of mine, He claims its a BCM BHF and thats according to the dealer where he got the bbl. its has stamp
HF HP MP 1/7 556 NATO.. I've checked the Bcm site ,the pics is not really that clear for 11.5, However the BCM BHF 14.5 or 16" bbl is marked this way. Contacted BCM about it, and according to them their bbls doesnt have a standard markings,it can change from time to time. Can you Gentlemen share your opinions and knowhow on this issue. I am hoping I got the bbl specs Im looking for (cold hammer forge, chrome line,etc.
Thanks
-
thank you sir, guess will just try to sell as is then.
-
Hello,
I have a 14,5 midlenght bbl, what is the shortest lenght if I'll decide to have it cut/shortend and still be reliable. I have another 14.5 Noveske NSR upper coming sooooon, really dont need two same lenght upper. thanks
-
paul,
I have a question on your step#7, are trying resized again or whats the purpose of the FL on your step 7
-
I called Dillon again and this what the Tech suggested, after resizing with the trimmer die, screw the FL die, backout a liitle bit, to bell the case and make sure not to touch the sized shoulder from the trimmer die. this is getting interesting.
-
The only thing thats confused me on Dillons setup is the FL die on the second tool head, there must be some logic behind it, unless maybe the FL is there only to expand the die?
-
Hello,
I asked Dillon for recommendation on a 2 toolhead set up for my 550 for 223, below was their suggestion.
Tool head one
decapping die
1200 trimmer
tool head 2
FL size
Powder
Seat
Crimp
leave the lube on the brass, then tumble the loaded round using plain corncob for 20 mins.
Have you tried this setup, resizing the brass twice with the trimmer/die first, then sizing again using the FL on the second tool head.
Will I be setting up the dies differently?
kindly share your opion and experience,
In anyway I am not questioning his advice.just need some clarification.
thanks
-
any secret on how to adjust the trimmer sizing die,if brass was already resized in S1 with a full lenght sizing die
-
I just got a 1200 Trimmer, I know some of my question and answers are all in the posts, I need to have it summarized, it gets a little confusing reading all the post
1. How do you use the case cage ( dillon) with the trimmer ( I know its a stupid question
2. Because I will be using a 2 tool head set, first tool head s1 resizing/ decapping die, s3 trimmer
How do you set up the triimer if already been sized at S1,
3. Whats your advice on how to configure this set up ( S1- sizer/ decap, S4 trimmer)
thanks, I know my inquiries is a liitle bit mix -up, a liitle confuse here
-
FN actually makes them!
I'd take an FN anything over a BCM any day.
thats interesting to know, where did you find this info, if thats the case, might as well get a FN for a spare.
-
here up North.
-
This is the only FaBCG I can find, all gone, Any experienced or opinion on this, my experience is limited to BCM and LMT. thanks
-
just a follow-up question, as per advice to keep a spare bolt, can I use any brand or type, will it match to my existing carrier. thanks
Yep, i'd suggest JP enhanced bolt or a Rainier Arms Bolt. Rainier being much cheaper and NiB coated.
I tried everything,nobody seems to have in stock, Although found 1 dealer who has a FN's FaBCG, anyfeedback or experience of this make, my experience is limited to BCM and LMT, FN BCg quality comparable to the 2 makes? thanks
-
I trim all mine to 1.740. Its easy and I dont have to trim them again. They split, fail or get lost before I need to trim them again.
using Rcbs X die,? or just std. die. thanks
-
just a follow-up question, as per advice to keep a spare bolt, can I use any brand or type, will it match to my existing carrier. thanks
-
I've had good luck with the VLTOR A5 system of receiver extension, buffer and spring. It is very close to a rifle length system for use with collapsible stocks. Used to experiment with different weights of buffers, spring strengths etc.
Done. Soft shooting and reliable function.
Mark
same here, with Vltor A5, I dont have to change spring/buffer combo for rifle, mid and carbine gas system, even with piston, although its nice to play around with other Vltor buffer weights.
Akai Shoto comp - revisited
in Open Pistols
Posted
Thanks, I am thinking of rebuilding my top end, I was considering the Shoto comp same with the Bedell Ti comp. The Akai seems to be "new in concept", Always want to try some new things, lol, My Schuemann Rib bbl has 2 ports already.