Mx Central

Thanks Ed. I am assuming the OD and length should be the same if you could check ID of the large that would be great.Once again thank you.

I am making some primer tube fillers but I am away from my reloading gear. I need to know the ID and OD of the Hornady and Dillon primer pickup tubes so I can machine some parts. I was assuming the Hornady and Dillon tubes were they same but could use dimensions on both just to be sure. Thanks everyone and have a great year!!!!!

I am making some primer tube fillers but I am away from my reloading gear. I need to know the ID and OD of the Hornady and Dillon primer pickup tubes so I can machine some parts. I was assuming the Hornady and Dillon tubes were they same but could use dimensions on both just to be sure. Thanks everyone and have a great year!!!!!

Did I see that gun in Frostproof?????

Needle nose Vice Grips are a total winner for this removal!

Hi all . I need to know what's involved in fitting an aftermarket barrel like a Barsto into a Glock.I am a machinist by trade and have access to a mill and lathe and can use files.I just can't seem to find any detailed instructions.Thanks guys!!!

I took this in a trade deal. It has a C-more and mount that I pulled off for a better look and to mill a little more off the mount.It came with 2 Wilson mags.Any idea who might have built it and whats a fair value for this gun with the C-more and mount.

I found the piece of tubing that came with the press hidden in the box. Hooked it up and ran it to a bottle. Works Great! Thanks all that replied. Man I love this place!

I wonder how many spent primers it takes to fill a 1lb powder bottle???

I think I will try the tube to the powder bottle idea.

Found a plastic bucket and it works fine. Thanks guys!

What are you guys using to catch the discarded primers on the LNL?? I was thinking a piece of hose to a can.Anybody got a good setup?? Thanks!

Use Esnipe just don't use it against me!!!

Anyone care to comment on the OAL???

I was just looking at my book and I misread the info. Starting should be 6.7 or more. That's why I love this forum , everyone seems to really want to help!

Thanks for the reply. That's the kind of answer I am looking for.I welcome any and all advice.

Hi I am loading my first batch of 45acp rounds. I am using Zero 230 grain Jacketed Hollow Points with 6.0 grains of Power Pistol. I am loading to an overall length of 1.225 in .These will be fired from a Glock 21 and an older Colt Gold Cup. I would like to hear from you experienced guys if this is a good place to start or if I need to adjust anything.These are the components I have to work with right now so please don't tell me to switch powders or bullets.Thanks in advance!

The easy way to check is measure the diameter of the primer punch...Duh.

FYI It came setup for large pistol primers. Thanks all for the help!

Yep I kinda just figured that out. Thanks!

A primer punch and slide were installed at the factory. I know exactly where the additional slide and punch that came extra with the press are but I cant put my hands on them until Monday.I dont have the 2 slides to compare the size so I was hopeing someone on this forum remembered which comes factory installed. Thanks!

Unfortunately I just moved and some things are not easily accessible.If I knew what was in from the factory I could setup 9 or 45.

Hi I have a brand new LNL press and I need to know if it comes from the factory setup with large or small primer parts???

I tried some Winchester White box today and they ejected solidly with either spring.Sampled 2 different boxes of Federal and they were softer ejecting and not really the same box to box.I cant wait for my chrono to get here!!!!

Oh yeah And some 9volt batteries....