![](http://content.invisioncic.com/r270761/set_resources_1/84c1e40ea0e759e3f1505eb1788ddf3c_pattern.png)
Quack
-
Posts
954 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by Quack
-
-
Woohooo!!!
end of Feb to the middle of March is what they are telling me....Dustin, I am hearing these may be shipping in the next two weeks, any truth to that?
-
To lower the reciprocating mass when the slide cycles, but to keep weight up front.
-
-
Blade-tech holster, BOSS hanger, CR Speed Pouches and belt.
-
if it were me and it was for USPSA I'd buy the CGW pro package Shadow ($1375) and then send it to CZC for an accu bushing upgrade so it'll basically be an accu shadow with the nice CGW sear and disco in it.
Second option would be a CZC or mink accu-shadow.
If it were for USPSA Production Division, would adding the accu bushing be an allowable modification? It's my understanding that you can buy an AccuShadow for Prod Div, but not create from from an existing Shadow.
Cannot add the Accu bushing afterwards.
-
Yep, that's why I bought the 38.
-
FFF Boardman Ohio has 8# jugs of HP38 ($139), Win231 ($147), TG ($129)
-
STI test range videos of the 38Super Open and .40 Limited
-
Yep
So I assume from Scott's post before I should order the pads for the 17 round Mecgars to fit my 15 round mags? Just want to make sure before I order.
YesSo what's the verdict, will they fit the15 round mags?
BTW, I just got my red set (MG17) today
-
I'm using the 8.5# spring and my DA is ~4.5#For that pull weight you will need to go light on the mainpspring.
CGW 8.5 will get the DA there. Will be Fed primer only and you'll need to pay attention the primer depth
Not sure on the depth, I just make sure the primers are well seated.
As for OAL, I run MG 124JHP @ 1.095"
-
Yep, saves from trying to type the info.
-
Tuning your Pistol for Faster Double Taps with Re…:
-
Try Brazos or Dawson, I would think they would get some of the first ones.
-
Doesn't look like a shorty.
-
SHOT Show 2015: The STI DVC OPEN and DVC LTD:
-
And if your gun doesn't have a CZC trigger job, add that cost to the $135.I realize that the CZC Short Reset Trigger System ($135) is hand-fitted, but how much shorter is the reset in SA compared to the Pre-B Disconnector?
-
Those will be harder to find than the Accu Shadows.
-
As long as I'm satisfied, that all that matters.
-
Yeah, heard that too (7:40 mark)Did I hear right that CZ Custom is trying to get the CZ 75 CTS LS-P SA/DA 9mm 91710 approved for USPSA Production? If so that would be a my next purchase once it gets approved.
Said he's hoping to get the CTS LS-B approved since it fits in the box.
-
-
It all depends on your use.
I didn't like the 18rd SP01 due to weak mag springs (base plate slid off a few times during reloads) and cost. I sold the 3 I had and used the money to pay for some of the CZC mags.
CZC plated mags are REALLY nice. I got my set pre-owned with the ShockBottle pads installed, but just swapped them out for Springer pads. The plated mags are slick and drop out of the gun the easiest.
I found a deal on the MecGar 17rd AFC. I haven't had issues with them. I have Springer pads on the way.
MecGar 19rd mags don't fit in the box.
If you can't tell, I like the Springer pads. The contour matches the grip better, I can get them engraved, can get a few different colors and are priced right.
Here's all the different mags I have.
If cost wasn't a factor, the plated mags.
The economical buy are the MG17AFC.
If I didn't find the deal on the plated mags, I probably wouldn't have bought them.
With that being said, the plated mags are my main match mags.
-
-
Maybe it's time to start. LOLThese have to be two of the sexiest guns STI has released in quite some time. I don't even shoot USPSA and I still want one of each!
I have a strange feeling I'm going to end up with a Limited.
-
New Trigger For My Edge
in 1911-style Pistols
Posted · Edited by Quack
SVI short flat is what I run.
Here's a long flat vs short flat