vgdvc Posted January 3, 2018 Share Posted January 3, 2018 Hello all. Has anyone successfully installed a Kensight LPA cut rear sight on a Tanfo Limited,Stock 2,3? If so what kind of fitting was required? Thanks Link to comment Share on other sites More sharing options...
Intercooler2 Posted January 4, 2018 Share Posted January 4, 2018 I have a thread here on it too and sent the member a PM that put them on. No response... must be busy. Anyway... I e-mailed the contact I have at Kensight and just so happen to have gotten my response today: Hey Jesse, Happy New Year! I’m sorry for the delay but we may be able to help with this one. Tanfoglio used to use LPA, which makes sense because both manufactures are Italian. They stopped using LPA and switched to a sight made by SMS. I don’t know if they changed sight cuts when they changed suppliers. From the looks of the sight below, they didn’t. If that’s true, we have several rear sights that will fit. Please confirm if your sight looks like the one below. If it does, the drawing for the LPA sight cut is below, please compare the two. If you need the drawing in metric, I’ll convert it. I’m pretty confident that our LPA style rear sights will fit. Also, could you give me the size of the front dovetail? They are measured from front to the back, at its widest point (the bottom). If you can’t, I’ll do my best to find out the dimensions for you. Link to comment Share on other sites More sharing options...
Intercooler2 Posted January 4, 2018 Share Posted January 4, 2018 Here is the drawing and I confirmed I have the old Super Sight cut on my Hunter. Just waiting for the part number they tell me to go with. Link to comment Share on other sites More sharing options...
Intercooler2 Posted January 4, 2018 Share Posted January 4, 2018 Nothing from Kensight as of today, but the member here got back with me. He is using this one: https://www.brownells.com/handgun-parts/sights/rear-sights/lpa-cut-1911-rear-sight-sku100002638-23299-49259.aspx?cm_mmc=cse-_-Itwine-_-shopzilla-_-100-002-638&utm_medium=cse&utm_source=connexity&utm_campaign=itwine&utm_content=100-002-638&avad=avant&aid=18449&cm_mmc=affiliate-_-Itwine-_-Avantlink-_-ale&utm_medium=affiliate&utm_source=Avantlink&utm_content=NA&utm_campaign=Itwine Link to comment Share on other sites More sharing options...
waktasz Posted January 8, 2018 Share Posted January 8, 2018 Good to know Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now