Kingman Posted June 13, 2016 Share Posted June 13, 2016 Does anyone make one? Link to comment Share on other sites More sharing options...
Protocall Design Posted June 13, 2016 Share Posted June 13, 2016 We're developing one. Tracy Protocall Design Link to comment Share on other sites More sharing options...
Kingman Posted June 13, 2016 Author Share Posted June 13, 2016 Ok. Shot my first NRA action yesterday. Shot a Master class score. Wouldn't mind having a prone pad on a spare open gun. I don't see going full bore at this point. Link to comment Share on other sites More sharing options...
Protocall Design Posted June 13, 2016 Share Posted June 13, 2016 (edited) I don't know specific timing, but I will post on our vendor tent when they're ready. Tracy Protocall Design Edited June 13, 2016 by Protocall Design Link to comment Share on other sites More sharing options...
Pin Shooter Posted July 1, 2016 Share Posted July 1, 2016 Hurry up Warren Link to comment Share on other sites More sharing options...
Protocall Design Posted July 1, 2016 Share Posted July 1, 2016 :-) I gotta do some stuff, first, so don't blame it all on him! Tracy Protocall Design Link to comment Share on other sites More sharing options...
Pin Shooter Posted September 19, 2016 Share Posted September 19, 2016 Any word yet Tracey? Link to comment Share on other sites More sharing options...
Protocall Design Posted September 19, 2016 Share Posted September 19, 2016 Not yet. I'm working through a stack of stuff that HAS to get done before that. It is on the list, though! Link to comment Share on other sites More sharing options...
Majority1775 Posted July 6, 2017 Share Posted July 6, 2017 Oh man tell me more about this 2011 Prone Pad information! :-). Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
ffl Posted July 10, 2017 Share Posted July 10, 2017 Mark you have Brett Foster's pad why do you need another one. Link to comment Share on other sites More sharing options...
RippinSVT Posted July 11, 2017 Share Posted July 11, 2017 I started building one for Moose before he decided on a singlestack open gun. As I saw it, it was much easier to get a cheapo takeoff magwell and adapt a riser to that, rather than making it from scratch. Those that have seen my adapters for Warren's pads know what I mean. However, I was planning to make some one-piece 2011 pads from delrin. The issues that made it more difficult were the interior recess that must be machined out so that the front of the grip frame can sit inside it, and the fact that there is little standardization between the frame manufacturers. SV, STI, CK, PT, etc may not all be able to use the same pad. If I was going to do it, it would be just for the standard polymer STI grip. Link to comment Share on other sites More sharing options...
CPL Posted July 24, 2018 Share Posted July 24, 2018 3D printed insert, fits Dawson Ice Link to comment Share on other sites More sharing options...
CPL Posted July 24, 2018 Share Posted July 24, 2018 Link to comment Share on other sites More sharing options...
RippinSVT Posted July 24, 2018 Share Posted July 24, 2018 Wow that’s a great idea! Link to comment Share on other sites More sharing options...
Service Desk Posted July 24, 2018 Share Posted July 24, 2018 Brilliant....are you going to sell them ? Link to comment Share on other sites More sharing options...
CPL Posted July 25, 2018 Share Posted July 25, 2018 that's the plan. Link to comment Share on other sites More sharing options...
Chris1911 Posted October 18, 2018 Share Posted October 18, 2018 Stainless works, very strong. Link to comment Share on other sites More sharing options...
The Blade Posted April 4, 2019 Share Posted April 4, 2019 That 3D print pad is the tits. I’d take one. Link to comment Share on other sites More sharing options...
BZW Posted March 1, 2022 Share Posted March 1, 2022 Any updates on these, are they available, where can you find one? btwilkes@bresnan.net On 7/23/2018 at 9:43 PM, CPL said: Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now