Ray_Z Posted January 8, 2010 Author Share Posted January 8, 2010 I don't use this service but, while you wait to get your roll sizer, I have heard that you can send your brass to Kenny at Speed Shooters Specialties ( http://www.speedshooterspecialties.com/ ) and he will roll size your brass for one cent per piece. Thanks for the reply CY I think I'll chamber check each piece until whatever sizer I get arrives. I think sending the brass that I have away to have it done is pretty cost prohibitive. Link to comment Share on other sites More sharing options...
Chris Spiess Posted January 13, 2010 Share Posted January 13, 2010 ok, the clock is ticking. I've saved my pennies and nickles (two very large shot bags full) and I have enough to buy the case pro that I need to take care of the glocked brass problem. Merlin, you said that you had a new and improved. Whassss hupp dude? Ray, You could defray some of the cost by renting that thing out, I'd be interested. I keep kicking the idea of a case-pro around, but I'm not ready to spring for one yet. Link to comment Share on other sites More sharing options...
Ray_Z Posted January 24, 2010 Author Share Posted January 24, 2010 OK sports fans, I did the dirty deed last night. I went to the case pro web site and ordered one. Now all I have to do is wait. Hell!! I never was much good at that. Question, will I need the 1/2 mounting kit if I plan on securing it to my bench? I have a 1/2" steel plate mounted to the front of my bench that I drill and tap for each of the pieces of equipment that I use. I plan on doing the same thing with the case pro. Link to comment Share on other sites More sharing options...
buster Posted March 3, 2010 Share Posted March 3, 2010 Is Case Pro taking orders from their web site? Just found this forum and have been trying to locate a case pro for a long time. Can anyone help? Link to comment Share on other sites More sharing options...
Shooting Coach Posted March 22, 2010 Share Posted March 22, 2010 I have been attempting to contact these folks without success. Phone and email do not work. Does anyone have a working phone or Email address? Or, how is progress on the new sizer by Merlin working out? Link to comment Share on other sites More sharing options...
Fireant Posted March 22, 2010 Share Posted March 22, 2010 I don't use this service but, while you wait to get your roll sizer, I have heard that you can send your brass to Kenny at Speed Shooters Specialties ( http://www.speedshooterspecialties.com/ ) and he will roll size your brass for one cent per piece. Thanks for the reply CY I think I'll chamber check each piece until whatever sizer I get arrives. I think sending the brass that I have away to have it done is pretty cost prohibitive. If shipping your brass is cost prohibitive, Kenny also sells roll sized 9mm, 40 s&w and sometimes other cal. already roll sized for less than most online places have un roll sized brass. Link to comment Share on other sites More sharing options...
millisec Posted May 8, 2010 Share Posted May 8, 2010 I just loaded 400 mixed brass 9mm for practice and I know some of it came from Glocks. Once I got my Hornady AP tuned it consistantly cranks out anything I feed it short of a berdan primer or crimped brass. I'm using the Redding comp pro set and everything is on the money. I'm still a little anal from lack of reloading experience on Hornady and I drop checked all 400 in a Wilson gage w/o a single reject. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now