vrod2011 Posted December 4, 2008 Share Posted December 4, 2008 This is a gun with a muzzle brake and synthetic stock. Out of a 3 shot group, it consistantly throws a flyer. We tried different ammo, different shooters, and we are sure that the scope and receiver hardware is tight. We are looking at glass bedding. Do you think that will solve the problem? If not, do you have any other suggestions? Link to comment Share on other sites More sharing options...
HSMITH Posted December 4, 2008 Share Posted December 4, 2008 Float the barrel with some card stock under the action, see what it does. And from now on tighten the stock screws with a torque wrench, do it the same every single time. Link to comment Share on other sites More sharing options...
John Dunn Posted December 4, 2008 Share Posted December 4, 2008 I'd recommend a 5 shot group. Use high quality ammo, good handloads are best. I'd take the brake off and look at the crown, try a group with the brake off. Bed the action. Try a known high quality scope. Link to comment Share on other sites More sharing options...
00bullitt Posted December 5, 2008 Share Posted December 5, 2008 I have a Mod 7 in .260 that was doing the same thing. I put an HS Precision stock on and bedded it and it holds .58" 5 shot groups at 100 with my loaded ammo now. Before it held 1" 5 shot groups with a flyer on occasion about 3" out. I haven't seena flyer yet. Also lapped and trued the bolt at the time we did the stock. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now