sinnsyk Posted February 29, 2008 Share Posted February 29, 2008 Just came in today. I've had EGW cut the hammer hooks to 0.012" for the best possible trigger job. The half-cock has been cut down. On the sear, the reset leg has been shortened and cut to the correct angle. The face has been stoned. With these parts you can drop-in for a pretty good trigger. Of course if you want the super-light trigger pull you'll have to stone the sear, but these parts makes it a much better starting point than the previous ones. Link to comment Share on other sites More sharing options...
Mo Hepworth Posted March 1, 2008 Share Posted March 1, 2008 interesting. email sent. Link to comment Share on other sites More sharing options...
kuh pahl Posted March 1, 2008 Share Posted March 1, 2008 How much? Link to comment Share on other sites More sharing options...
sinnsyk Posted March 3, 2008 Author Share Posted March 3, 2008 How much? As listed on my shop; $98 for hammer, $50 for sear. Both prepped and can be dropped in. For a finer trigger job, of course stoning and lightening of springs can do a lot. Link to comment Share on other sites More sharing options...
Mo Hepworth Posted March 7, 2008 Share Posted March 7, 2008 can't seem to add the prepped Kit (hammer,sear, firing pin, spring) to my order? Link to comment Share on other sites More sharing options...
Mo Hepworth Posted March 7, 2008 Share Posted March 7, 2008 I'll just order the parts seperately Henning,...and I will add a note saying "prepped". thanks MO Link to comment Share on other sites More sharing options...
Mo Hepworth Posted March 7, 2008 Share Posted March 7, 2008 thanks for the quick order and phone call Henning,...great deals and great service!! I appreciate the call! Link to comment Share on other sites More sharing options...
Mo Hepworth Posted August 1, 2008 Share Posted August 1, 2008 I had Rob E do some fitting to fine tune the set,..and also reduce reset and trigger reach.....WOW,...great trigger! Link to comment Share on other sites More sharing options...
sinnsyk Posted August 2, 2008 Author Share Posted August 2, 2008 I just received 'generation III' of the hammer. The sides have been reduced (EDM'd) and the half-cock is smaller. Nicer for sure. To make a truly great trigger there's gunsmithing involved, but a great starting point. Have both hammers and sears in stock. Link to comment Share on other sites More sharing options...
Big Bear Posted August 22, 2008 Share Posted August 22, 2008 The hammer I got from Leo, you had him send me, is it the new design or should I try to get that one? Link to comment Share on other sites More sharing options...
JPang Posted September 23, 2008 Share Posted September 23, 2008 I just received 'generation III' of the hammer. The sides have been reduced (EDM'd) and the half-cock is smaller. Henning, I understand from your previous post that the first hook is cut down to 0.012" and you mentioned that the second hook (half-cock) has been also cut down. What is the height of the second hook now? Thanks for the info. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now