ice Posted January 9, 2002 Share Posted January 9, 2002 i just assembled a modified pistol with oko red dot sight , sps frame and slide and a shchumann barrel. but things are not working out well, like there's a problem in ejection and often times the bullet wont just go inside the chamber. what should i do? is it the magazine? is it my grip? bullets? or the gun itself? Link to comment Share on other sites More sharing options...
PaulW Posted January 9, 2002 Share Posted January 9, 2002 Ice, If you would try and be more specific. What is the round doing or not doing? What shape of bullet and what length are you loading them out to? What lb recoil spring are you using? Link to comment Share on other sites More sharing options...
ice Posted January 12, 2002 Author Share Posted January 12, 2002 im using 180gr. bullet head and 5.4gr. ba-9/ap70 gunpowder and a 12lbs. recoil spring. (Edited by ice at 7:14 pm on Jan. 11, 2002) Link to comment Share on other sites More sharing options...
2alpha Posted January 12, 2002 Share Posted January 12, 2002 Ice, I'll try to put this nicely. You need to find a good gunsmith who is willing to take on your project, you're in way over your head already. JJ Link to comment Share on other sites More sharing options...
Julien Boit Posted January 14, 2002 Share Posted January 14, 2002 What is the length of your ammo ? What is the problem with the ejection, is there any interference with the scope ? Check that your extractor has the proper tension to hold the cartridge against the breech face. Most of the time the extractor IS the cause for feeding or extraction problems. DVC Julien :-) Link to comment Share on other sites More sharing options...
Guest bulm5 Posted January 15, 2002 Share Posted January 15, 2002 Hey Julien , Still shooting that BUL m5?????? Link to comment Share on other sites More sharing options...
Julien Boit Posted January 15, 2002 Share Posted January 15, 2002 Hey BulM5 I have switched to SPS, but the guns are still running . I was surprised to see how much the Bul became an expensive pistol, at least in France, is it the same thing in your country ? DVC Julien :-) Link to comment Share on other sites More sharing options...
Guest bulm5 Posted January 18, 2002 Share Posted January 18, 2002 right now, there is no distributor for BUL pistols here in the U S . The last time I checked it was still the same price. SAul K is arranging with a Co. in AZ ( I believed) to be the distributor of BUL pistols here in the U. S. THey may start in April. Still using para mags on mine. Ultra reliable gun. Link to comment Share on other sites More sharing options...
ice Posted January 18, 2002 Author Share Posted January 18, 2002 thanks guys! i had my gun checked by a gunsmith and he sure did a lot of adjustment in the extractor.(he used a hammer) i just fired 300 rounds yesterday and the gun's running great. you're efforts are greatly appreciated! (Edited by ice at 3:28 am on Jan. 18, 2002) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now