Brendan M Posted November 29, 2006 Share Posted November 29, 2006 (edited) Pulled out gun and mags for cleaning, feed ramp was filthy. I guess in all the fun I’ve been having shooting Steel and USPSA I lost track of how many rounds have been fired sense last cleaning. I cleaned everything thoroughly, my Steel match was cancelled tonight but I’m willing to bet I don’t have any problems with the clean gun. If I do I'll report back. Thanks to those who took time to respond. Edited December 1, 2006 by Brendan M Link to comment Share on other sites More sharing options...
Carlos Posted November 30, 2006 Share Posted November 30, 2006 (edited) Hmm - mags are 16 rnd - which makes them latest Generation and Mec-Gar builds them for CZ. Too few rounds for mags to be out of spec. Ammo is factory. I can only come up w/ 2 possible solutions 1) return it to CZ as this should not occur w/ new mags & factory ammo or 2) don't take this wrong, but, how clean is the gun? CZs run very tight tolerances and they ARE, frankly, sensitive to dirt in the mags, behind the extractor and in the chamber. I clean all 3 areas and the rule on mags is this: if the mag touches the ground outdoors, I take it apart & clean it before the next stage (just like a limited gun). The CZ is not built like a Glock in that respect. Dirty CZ extractor/chamber and mags might account for the problems you describe. Please let us know how you resolve this issue. Edited November 30, 2006 by Carlos Link to comment Share on other sites More sharing options...
Trisha Lowry Posted November 30, 2006 Share Posted November 30, 2006 What is your oal? I had that problem with mine and had to shorten mine down. Am now shooting 125jhp 1.080 oal.... Link to comment Share on other sites More sharing options...
eric nielsen Posted November 30, 2006 Share Posted November 30, 2006 See red-letter post by Benos: http://www.brianenos.com/forums/index.php?...amp;hl=feedramp Link to comment Share on other sites More sharing options...
revchuck Posted November 30, 2006 Share Posted November 30, 2006 Brendan - I'm with Carlos. Call CZ-USA and tell them. They'll probably ask you to send it in. My 75B ran 100% with an unpolished ramp and Zero 125 grain JSPs. (It's still 100%, but I had the feed ramp polished for GP). If it needs a special OAL, it's broke. If it doesn't feed factory hardball from CZ mags, ditto. CZ-USA is a good company, and they'll make it right. Link to comment Share on other sites More sharing options...
Flexmoney Posted November 30, 2006 Share Posted November 30, 2006 It sounds like it could be a common problem that we have talked about with the CZ before? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now