CZ Shadow 2 - guide me to the perfect Production Optics setup

[o27]

Just got my new Shadow 2 (transitioning from 2011) I will setup for IPSC Production Optics (Carry Optics). I´m from Europe, so not all US options is available here. 

 

Need your expert input for guiding me to the optimal setup.

 

The S2 is the standard version, so debating to have the slide milled for red dot or just start with dovetail mount.

 

For optics, I´ve planning on a Delta Optical Stryker in 8 Moa; https://www.specshop.pl/product-eng-24070-Delta-Optical-Red-dot-sight-Stryker-8-MOA-DO-2329.html or the Delta Optical HD26 (C-more RTS): https://www.specshop.pl/product-eng-32342-Delta-Optical-MiniDot-HD-26-Sight-Without-Mount-6-MOA-DO-2327.html

 

The dots seems to be near identical to respective the FTP Alpha 3 and the C-more RTS2

 

Whats your take?

 

 

 

 

[zoom2]

For dovetail mount both of them are comparable good.

For miling slide FTP3/Stryker is much better because it has no locking screw on the back.

RTS2/HD26 has locking screw on the rear so could be difficult to make propper cut to reach this locking screw.

In case of Shadow 2 OR ( you have not OR) there is no problem therefore slide has a different dimensions

 

 

Edited April 11, 2021 by zoom2

[o27]