38superman Posted October 28, 2005 Share Posted October 28, 2005 I intend to develop a load with the Montana Gold 230 gr. bullet and I would like some input. I know a lot of shooters like 320, titegroup, etc. but I don't like to match heavy bullets with powders that are quite that fast. I have a pound of 330 and I would think it would be a good place to start, yet VV does not list it in their data. Any suggestions? Tls Link to comment Share on other sites More sharing options...
Canuck-IL Posted October 28, 2005 Share Posted October 28, 2005 Never have seen it listed...the Midway load book which is a bit dated by now, lists 320, 340 and 350 as does the current VV downloadable manual. I suspect one could interpolate for 330 as it's between 320 and 340 in speed, closer to 340. It'll be interesting to see if anyone has some data. Bullseye archives I've scanned had none. /B Link to comment Share on other sites More sharing options...
Skywalker Posted October 28, 2005 Share Posted October 28, 2005 TLs, here's my bit of info. Unfortunately I didn't use MG or 230grs. 200grs LSWC-BB 6,0grs N-330 CCI-300 1.235" 811,5fps 162,3PF 200grs LSWC-BB 6,3 N-330 CCI-300 1.235" 877,7fps 175,5PF 200grs LSWC-BB 6,6 N-330 CCI-300 1.235" 903,8fps 180,8PF 205grs LRN-BB 6,0 N-330 CCI-300 1.235" 796,4fps 163,3PF 205grs LRN-BB 6,3 N-330 CCI-300 1.235" 834,1fps 171,0PF 205grs LRN-BB 6,6 N-330 CCI-300 1.235" 930,5fps 190,7PF 205grs LRN-BB 6,4 N-330 CCI-300 1.235" 894,2fps 183,3PF 200grs LSWC-BB 6,4 N-330 CCI-300 1.250" 866,2fps 173,2PF HTH. Link to comment Share on other sites More sharing options...
ricciardelli Posted October 28, 2005 Share Posted October 28, 2005 N-330 From 4.9 grains to 7.5 grains CCI-300 Primer Link to comment Share on other sites More sharing options...
Harmon Posted November 2, 2005 Share Posted November 2, 2005 6.0 grains, fed primer loaded 1.245 should make major in a 5 inch govt model Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now