elftech86 Posted January 7, 2019 Share Posted January 7, 2019 In the process of finishing up a project. I’m ditching the bushing barrel setup. I have the new barrel inbound. Looking for guide rod/plug/spring suggestions. I apologize if this seems open ended. Any suggestions would be appreciated. Thanks. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
m-cz-shadow-2 Posted January 7, 2019 Share Posted January 7, 2019 EGW sells a 6" Stainless for ~40$ and a 6" tungsetn for ~120$ if I recall correctly Link to comment Share on other sites More sharing options...
Rnlinebacker Posted January 7, 2019 Share Posted January 7, 2019 In the process of finishing up a project. I’m ditching the bushing barrel setup. I have the new barrel inbound. Looking for guide rod/plug/spring suggestions. I apologize if this seems open ended. Any suggestions would be appreciated. Thanks. Sent from my iPhone using TapatalkStandard 5 inch with reverse plug should be fine. just gotta tune it a little bit and break the sharp edges. I run an aluma buff on mine which definitely dampens sight lift a slight bitSent from my SM-N950U using Tapatalk Link to comment Share on other sites More sharing options...
elftech86 Posted January 8, 2019 Author Share Posted January 8, 2019 Thank you for the input. It looks like I have most of it figured out. I have to by a reamer. I have the guide rod and spring selected, but I still need to pick the right "open front" reverse plug. I also need to purchase the Collar reverse plug reamer. My slide was set up with a bushing barrel and currently lacks a collar to catch the plug. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now