Jump to content
Brian Enos's Forums... Maku mozo!

6” 2011 project .40


elftech86

Recommended Posts

In the process of finishing up a project. I’m ditching the bushing barrel setup. I have the new barrel inbound. Looking for guide rod/plug/spring suggestions. I apologize if this seems open ended. Any suggestions would be appreciated. Thanks.

 

 

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

In the process of finishing up a project. I’m ditching the bushing barrel setup. I have the new barrel inbound. Looking for guide rod/plug/spring suggestions. I apologize if this seems open ended. Any suggestions would be appreciated. Thanks.
 
 
Sent from my iPhone using Tapatalk

Standard 5 inch with reverse plug should be fine. just gotta tune it a little bit and break the sharp edges. I run an aluma buff on mine which definitely dampens sight lift a slight bit2316b5985d8f12df4adef88982ab98f8.jpg

Sent from my SM-N950U using Tapatalk

Link to comment
Share on other sites

Thank you for the input. It looks like I have most of it figured out. I have to by a reamer. I have the guide rod and spring selected, but I still need to pick the right "open front" reverse plug. I also need to purchase the Collar reverse plug reamer. My slide was set up with a bushing barrel and currently lacks a collar to catch the plug.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...