Very large hands and henning magwell?

[hondakilla98]

I just bought a used stock 3 that's already slicked up and that came with lots of extra parts. I won't be competing with it. Just enjoying it at the range. I love the look and functionality of a magwell, but I'm wondering if it's going to work with my really big hands. I took a couple photos of me holding the pistol. Am i worried about nothing? Or should i be looking at a different magwell?

 

 

 

 

My mags all have aftermarket base plates. Will they work with a magwell?  Or do i need different ones? 

 

 

 

Edited December 10, 2018 by hondakilla98

[kneelingatlas]

You should be fine with Henning's magwell, as you can see it adds quite a bit of length to the bottom of the frame.  Although I'm pretty sure none of your base pads will work without heavy modification.

 

[hondakilla98]

3 hours ago, kneelingatlas said:

You should be fine with Henning's magwell, as you can see it adds quite a bit of length to the bottom of the frame.  Although I'm pretty sure none of your base pads will work without heavy modification.

 

 

Ok. Now to get a magwell and grips. What base pads do you suggest? I'd prefer to not replace the springs or followers. 

[kneelingatlas]

4 hours ago, hondakilla98 said:

 

Ok. Now to get a magwell and grips. What base pads do you suggest? I'd prefer to not replace the springs or followers. 

 

The Henning 140mm pads are designed to work with his mag well and you don't have to change springs/followers to use them.