dlightning Posted November 25, 2018 Share Posted November 25, 2018 I am trying to work up a load. I have two issues so far: (need some help) i got a sample pack pack with blue and dark green 180 gr at .401 Loaded to 1.118, the blue pass my barrel plunk test, the green did not. My my second issue is the short oal. It is almost to the point where the projectile start to taper. Worried about having proper neck tension. some suggestions would help, is this normal for this bullet. This is my first time loading for limited PF. I also loaded with Acme 180 and they pass the plunk test at 1.135. Thanks for anyhelp. Link to comment Share on other sites More sharing options...
Eman Posted November 25, 2018 Share Posted November 25, 2018 I am using the blue 180gr eggleston bullets in my Glock 35 with factory barrel. I barely (scrape) pass the plunk test at 1.135. I currently shoot them with 4.3gr titegroup at 1.125 OAL. Also, The color shouldnt make a difference in the bullet profile. Link to comment Share on other sites More sharing options...
Furrly Posted November 25, 2018 Share Posted November 25, 2018 Try the. 400, the 401 may be to wide for your barrel. I run 400 on all of my 2011.. They won't run 401.. Link to comment Share on other sites More sharing options...
dlightning Posted November 29, 2018 Author Share Posted November 29, 2018 I got a Lee FCD. Solve my problem. I check the brass and it turn out to be the culprit. Fiochi brass is thicker and thus was the caused of the sticky problem. Thank you everyone. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now