LeviSS Posted May 7, 2017 Share Posted May 7, 2017 My Limited .40 has broken in to about a 3.5-4lb SA trigger. It is nice and crisp, but I'd like to lighten it up somewhere closer to 2-2.5lb. Im hoping to get by with just changing springs. Which springs need changed to drop it down a little? Also...is there a floating trigger pin for Tanfo? That would make total disassembly so much easier. Link to comment Share on other sites More sharing options...
IronArcher Posted May 7, 2017 Share Posted May 7, 2017 Sear spring and trigger return spring from Patriot Defense will help... but to getting it down much more, polish job will cut your numbers nearly in 1/2Sent from my iPhone using Tapatalk Pro Link to comment Share on other sites More sharing options...
bpipe95 Posted May 7, 2017 Share Posted May 7, 2017 (edited) Leave your factory springs and drop in a Titan hammer, if you need more you can drop the hammer spring. Caution as a little goes a long way with the Titian in an sao gun. I tried this as an experiment and it's so good in my gun that I left it. Edited May 8, 2017 by bpipe95 Link to comment Share on other sites More sharing options...
johnbu Posted May 8, 2017 Share Posted May 8, 2017 You can get a floating trigger pin from CGW. The "canik" one. Buy Patriot Defense sear and trigger return spring, polish the plunger assembly / trigger bar and you will be very close to meeting your goal. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now