anyracoon Posted June 4, 2005 Share Posted June 4, 2005 Any one out there have a source for a conector to go between the vacuum manifold on the trimmer and a vacuum hose? I've been using a PVC coupler and duck tape, there has got to be something a little more professional! Link to comment Share on other sites More sharing options...
warpspeed Posted June 4, 2005 Share Posted June 4, 2005 Check at Home Depot or Lowes. Look in the Shop Vac section. Link to comment Share on other sites More sharing options...
calhunter Posted June 4, 2005 Share Posted June 4, 2005 I forgot what size the RT1200 adapter is but all of the adapters are here. You'll need a hose too. http://www.shopvac.com/dev/catalog/dept.asp?id=14 Link to comment Share on other sites More sharing options...
S-Hurt Posted January 17, 2009 Share Posted January 17, 2009 Just bought the RT1200 .... easy to use and set up! Link to comment Share on other sites More sharing options...
Ground Loop Posted January 17, 2009 Share Posted January 17, 2009 Holy necropost 2005?! That said, the issue is still the same as always.. the one-size-fits-none vac fitting on the Trimmer is still there. I used a large "barbed" PVC fitting and shoved it in. The other end goes over a vac hose extension which I hit with the hot-air gun until it was soft enough to force over the PVC. It works. Now I have to wear hearing protection, but if it lets me trim 1,000 pieces in an evening, I'll dig out the Peltors! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now