BadShot Posted June 22, 2016 Share Posted June 22, 2016 Hi All, I just got my new XL-650 this weekend. I bought it set up for 9mm, but I'm ready to get the pieces to load .38 short colt. I already have the Lee Short Colt die set from my old 550. Is this the proper list of goodies? .38 special caliber conversion Dillon large pistol case feeder plate Purple .40 case feeder adaptor Thanks, Skip Link to comment Share on other sites More sharing options...
alecmc Posted June 23, 2016 Share Posted June 23, 2016 (edited) 38 special shell plate small pistol case feeder plate works for me i used to use the green 9mm case feeder adapter plate, but I reamed it out with a drill bit to the very next size to fit the 38 short colt case. ( still worked with 9mm ) Edited June 23, 2016 by alecmc Link to comment Share on other sites More sharing options...
afoulk Posted June 23, 2016 Share Posted June 23, 2016 Looks like your setup will work. Here's my setup 9mm powder funnel/flaring die. The .38/.357 might work, but I don't know for sure. Large pistol case feeder - I get occasional hangups at the mouth of the case feeder so the small could work better. Purple (40 cal) case feeder adapter the rest of the components are from the .38/357 caliber conversion kit I'm using dillon 9mm dies for seating and crimping.My sizing die is a Lee undersize .38/.357 special die. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now