Nickoli Posted May 6, 2016 Share Posted May 6, 2016 I have been working on my Super Nova a little bit at a time and I am wondering how much some of you guys have opened up the load port for quad loading. the trigger housing has part of the port attached to it and I was thinking about removing the front portion of it completely where is joins back into the receiver as it looks like it would be strong enough to hold up without breaking the sides off. Does anyone have pictures of how much material they have removed from their ports? I can take some pictures later of the work I have already done and some of the areas I have marked out to take into work and play on the mill with. Link to comment Share on other sites More sharing options...
Dan Sierpina Posted May 6, 2016 Share Posted May 6, 2016 Whittle away, I'd get another trigger housing first though. Link to comment Share on other sites More sharing options...
TyinTX Posted May 6, 2016 Share Posted May 6, 2016 You can go pretty far, but I wouldn't take the front out entirely. I found I was hitting the rear of the pump more than anything with quads so it got the chop. Link to comment Share on other sites More sharing options...
Nickoli Posted May 6, 2016 Author Share Posted May 6, 2016 I will take pictures when I get home of its current configuration. I cut the pump far enough that I think I will be able to clear it but I can take more and shape it as needed. Link to comment Share on other sites More sharing options...
Nickoli Posted May 7, 2016 Author Share Posted May 7, 2016 Current configuration of how a cut the pump and load port. If I get time I might take some pieces into work this week and see what I can do on the machines and I might stipple everything as practice for my M2. Link to comment Share on other sites More sharing options...
GunCat Posted May 8, 2016 Share Posted May 8, 2016 Nick, You can safely take about half or more of the thickness off the front of the port, but do most of the removal on the inside to create an undercut...run your file into the opening in the same directions that you'll load shell and you'll understand what I am describing. Link to comment Share on other sites More sharing options...
Nickoli Posted May 16, 2016 Author Share Posted May 16, 2016 Thank you guys. Once I get some free time I and going to work on this again and I will post some pictures of the how it looks after I get it the way I want. Going to remove some material from other areas to aid in manipulation and try to make loading easier, should be a fun little experiment lets hope it works. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now