Limited mag release removal

[.45 ACP nut]

I recently watched a video showing how to completely disassemble an EAA Limited, and the mag release was the last thing removed. Does anyone know if there is a way to remove the mag release without removing the sear cage, hammer, trigger bar, etc.?

Edited March 12, 2016 by .45 ACP nut

[CZinSC]

Yes and No. You can remove the mag release without removing the hammer and sear cage. However, you do need to remove the trigger bar because you have to remove the plunger to get the mag release out.

[.45 ACP nut]

Thank you for your reply! That is what I thought. Being new to this design I just wasn't sure if the trigger bar would be free to be removed or if doing so would give enough room to remove the plunger.

[johnbu]

Yes and No. You can remove the mag release without removing the hammer and sear cage. However, you do need to remove the trigger bar because you have to remove the plunger to get the mag release out.

I just yesterday pulled the plunger from a MATCH with sear, safety and trigger bow installed. Just manually lift up the trigger bow, push down and rotate the plunger head 180, then remove .

[.45 ACP nut]

Thank you. I'll see if this works for me I appreciate the help.