Jump to content
Brian Enos's Forums... Maku mozo!

.45 ACP nut

Classified
  • Posts

    93
  • Joined

  • Last visited

Everything posted by .45 ACP nut

  1. On further reflection I see that you're right Dan Sierpina.
  2. Larry Davidson's XS Shredder grips....https://sgmgrips.com/1911_vigilant_series/1911_xs_shredder_page
  3. Doesn't look like they make one for the 1911.
  4. I like the Metalform model # 9.743 BN (black nitrate) or 9.743 (stainless steel). They have worked in every 9mm 1911 I've owned.
  5. • Duplicating features that are on a factory, mass produced slide available to the general public is permitted. Appendix D5 21.
  6. Damn Good Bullets https://dgbullets.com/
  7. Here you go: https://fusionfirearms.com/freedom-series-reaction
  8. https://fusionfirearms.com/freedom-series-reaction Lots of bang for the buck!!!
  9. 6-Oct-21 9mm Mixed DG 135 grain RN coated Clean Shot 3.6gr 941.2fps S&B 1.145OAL 50°F 127,062 Good from CZ P-10F very consistent
  10. Some of the Norma brass I received lately had the smaller hole and some had 'regular' sized holes. Even with my eyes I can see the difference. The smaller ones get tossed into the recycling bucket and the larger one go in the press. The cases I've inspected with the smaller hole, that have gone through the press, have a flare into the primer pocket. I'm not willing to bet that it won't affect how the primer works, so I toss them.
  11. I take a pair of vise grips/channel lock pliers and crush the rim so no one else can use them, then put them in the recycled brass bin.
  12. My favorite load; 5-Aug-21 9mm FC brass DG Bullets 135 grain RN coated Sport Pistol 3.6gr 965.5 fps CCI primer 1.155 OAL 66°F 130,343 Good from Sig P320
  13. These guy's stippled my TXG for me. https://idgstippling.com/ Did an outstanding job.
  14. "Voluntary upgrade program" https://www.sigsauer.com/p320-voluntary-upgrade-program/
  15. For the "Fullsize" frame the LOK and TF are both equivalent to the medium back strap, according to my calipers. FWIW the Lok weighs 3.54 oz. and the TF weighs 3.86 oz. The checkering on the LOK goes farther around the side than on the TF.
  16. .45 ACP nut

    CZ 97 sights

    I'm sure the dovetails on the newer 97B are the same as the SP-01. I put a taller rear sight from Dawson Precision and I ordered the one that 'fit' the SP-01. Sorry, but I haven't had a desire, nor researched, tritium sights for the 97B.
  17. .45 ACP nut

    New P-10 F CR

    If you don't mind, where did you get a brass backstrap?
  18. The Blade-tech holster, I have, that was built for the SP-01 will work very well for the 97B if you loosen the retention screws a few turns.
  19. I bought the TTI +5 base pads to go with my 17 round mag bodies. With a Grams follower and spring I get 23 rounds in the mag. They work great.
  20. Nope. At one time I had both in my safe and the SAR K2-45 mags don't fit the 97B. BTW: I still have the 97B.......
×
×
  • Create New...