brian45acp Posted June 14, 2015 Share Posted June 14, 2015 (edited) I noticed of my 2 SP-01's that my rounds just barely touch the corner of my slide stop lug. Is there any harm in filing that corner down about 5-10 thousandths and finishing it with 1500 sand paper to a polish? I noticed the CZC and CGW have a modified slide stop but seems easy enough to knock a corner down and not have to buy a new one. My rounds are super close to hitting and on the one it just touches it every now and then. I can see some copper marks on the slide stop corner so at some point they must be hitting on both. I just want to be sure there is not something I am missing here and about to butcher. I cant see any harm in doing this and the bottom corner which needs to be removed I dont see providing any function the the gun other then hitting my bullets. Edited June 14, 2015 by brian45acp Link to comment Share on other sites More sharing options...
facelessman Posted June 14, 2015 Share Posted June 14, 2015 That's pretty much what CZC does. As long as there's enough material left to contact the mag follower and lock the slide back, you're good to go. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now