Czman Posted April 5, 2015 Share Posted April 5, 2015 I now have a pair of Czechmates - one open and one limited. I like to keep some spare parts on hand. Does anybody know where I can find a complete orderable part list (with CZ part numbers) for the Czechmate? Cz-USA does not have a section for Czechmate. I tried calling a few times, could not get through except to voicemail. Email to the parts department bounced. I am primarily interested in things like springs, any pins that wear, including firing pin, sear. Link to comment Share on other sites More sharing options...
trgt Posted April 5, 2015 Share Posted April 5, 2015 (edited) I haven’t seen an orderable list. If you search ‘Czechmate’ at shop.cz-usa.com, you get the following parts that might be interesting to you, as things that would wear or need to be replaced. - Czechmate recoil spring- Czechmate slide stop pin, no lever- Czechmate scope mount screw- 20 or 26 round mag Other ‘wear’ items are most likely common to Tactical Sport or CZ75, so you need to search that way.- Firing pin spring- Main spring / hammer spring- Slide stop- Trigger spring - Magazine springs There are other czechmate specific parts you can order from shop.cz-usa.com as needed or to have handy, but not things you’d normally need to keep for spare parts.- barrel- compensator or front sight block- magwell- recoil spring housing- scope mount- slide racker- grips- concealed hammer ... and of course the springs you can also get at Cajun Gun works, CZ Custom, Wolfe Gunsprings ... and the CZ Custom follower and springs are nice to use from the get-go, especially with CZ Custom base pad on the 170 mags. Edited April 5, 2015 by trgt Link to comment Share on other sites More sharing options...
Czman Posted April 6, 2015 Author Share Posted April 6, 2015 Thanks! Link to comment Share on other sites More sharing options...
Czman Posted April 10, 2015 Author Share Posted April 10, 2015 Spare Parts and Customization List here for future reference for anybody interested. Best products and pricing from a total of 6 vendors - CZ UB, CZ USA, DAA, CZCustom, CGW, Kensight. Sights: ken sight TRT LPA 1911 adjustable rear (from Kensight) , P09 front fiber sight 6.5 mm (CZCustom) Grip: Blue - TS checkered Short from CZ UB 1091-1182-04_B Thumb Rest: DAA thumb rest Trigger: Blue - TS flat SA aluminum trigger from CZ UB 1091-1310-04_B Magwell: Blue - Magazine funnel anodized CZ 75 TS from CZ UB , 1091-1148-04_B Spare parts: From CGW: Recoil spring pack From CZCustom: CZ 75 Trigger Pin New Style (all models) 10015 CZ 75/85/SP01 Spring Main / Hammer 13 LB 30027 CZ Ejector 75 TS 10024 CZ Sear Spring 10027 CZ 2075 / Rami Factory Firing Pin Spring 10120 CZ 85C,TS,Shadow Extended Firing Pin 10229 CZ Grip Screw Hex Blue From CZ USA: 047001401601 TRIGGER BAR TAC SPORT/IPSC 047001801601 EJECTOR SPRING (REAR) TAC SPORT/IPSC 047020201602 TRIGGER SPRING TAC SPORT 047011101601 MAIN SPRING PLUG PIN TAC SPORT/IPSC 0420027101 SEAR NON "B" STYLE 75/85 Not all parts are necessary but I like to keep spares. Link to comment Share on other sites More sharing options...
himurax13 Posted April 15, 2015 Share Posted April 15, 2015 What work has to be done to a TS slide to allow a threaded barrel and comp to slide out of the front? Link to comment Share on other sites More sharing options...
PRanta Posted April 15, 2015 Share Posted April 15, 2015 You need to cut the slide and frame shorter. Some manual fitting is needed between comp and slide. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now