Jump to content
Brian Enos's Forums... Maku mozo!

Czechmate spare parts?


Czman

Recommended Posts

I now have a pair of Czechmates - one open and one limited. I like to keep some spare parts on hand.

Does anybody know where I can find a complete orderable part list (with CZ part numbers) for the Czechmate? Cz-USA does not have a section for Czechmate. I tried calling a few times, could not get through except to voicemail. Email to the parts department bounced. I am primarily interested in things like springs, any pins that wear, including firing pin, sear.

Link to comment
Share on other sites

I haven’t seen an orderable list. If you search ‘Czechmate’ at shop.cz-usa.com, you get the following parts that might be interesting to you, as things that would wear or need to be replaced.

- Czechmate recoil spring
- Czechmate slide stop pin, no lever
- Czechmate scope mount screw
- 20 or 26 round mag

Other ‘wear’ items are most likely common to Tactical Sport or CZ75, so you need to search that way.
- Firing pin spring
- Main spring / hammer spring
- Slide stop
- Trigger spring

- Magazine springs

There are other czechmate specific parts you can order from shop.cz-usa.com as needed or to have handy, but not things you’d normally need to keep for spare parts.
- barrel
- compensator or front sight block
- magwell
- recoil spring housing
- scope mount
- slide racker
- grips
- concealed hammer

... and of course the springs you can also get at Cajun Gun works, CZ Custom, Wolfe Gunsprings ... and the CZ Custom follower and springs are nice to use from the get-go, especially with CZ Custom base pad on the 170 mags.

Link to comment
Share on other sites

Spare Parts and Customization List here for future reference for anybody interested. Best products and pricing from a total of 6 vendors - CZ UB, CZ USA, DAA, CZCustom, CGW, Kensight.

Sights: ken sight TRT LPA 1911 adjustable rear (from Kensight) , P09 front fiber sight 6.5 mm (CZCustom)

Grip: Blue - TS checkered Short from CZ UB 1091-1182-04_B

Thumb Rest: DAA thumb rest

Trigger: Blue - TS flat SA aluminum trigger from CZ UB 1091-1310-04_B

Magwell: Blue - Magazine funnel anodized CZ 75 TS from CZ UB , 1091-1148-04_B

Spare parts:

From CGW: Recoil spring pack

From CZCustom:

CZ 75 Trigger Pin New Style (all models) 10015

CZ 75/85/SP01 Spring Main / Hammer 13 LB 30027

CZ Ejector 75 TS 10024

CZ Sear Spring 10027

CZ 2075 / Rami Factory Firing Pin Spring 10120

CZ 85C,TS,Shadow Extended Firing Pin 10229

CZ Grip Screw Hex Blue

From CZ USA:

047001401601 TRIGGER BAR TAC SPORT/IPSC

047001801601 EJECTOR SPRING (REAR) TAC SPORT/IPSC

047020201602 TRIGGER SPRING TAC SPORT

047011101601 MAIN SPRING PLUG PIN TAC SPORT/IPSC

0420027101 SEAR NON "B" STYLE 75/85

Not all parts are necessary but I like to keep spares.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...