kaech Posted February 14, 2015 Share Posted February 14, 2015 So while at my local range today the owner gave me 1000 FMJ bullets. I've never loaded 115 grain bullets before,so I'm looking to get pointed in a direction to help save me time, the powders that I have are titegroup win autocomp power pistol AA7 unique any and all advice would be great, charge,coal, ect, ect. by the way these will be loaded on the Dillon 650 for Glock 9 mm Link to comment Share on other sites More sharing options...
Sarge Posted February 14, 2015 Share Posted February 14, 2015 There is an entire forum here devoted to loading 9mm. Best to just click on over there and type 115 into the search window. Probably 1000 recipes for you to choose from Link to comment Share on other sites More sharing options...
kaech Posted February 14, 2015 Author Share Posted February 14, 2015 thanks Sarge I know you're an asset to this sub forum but I was really hoping to get some recipes on this thread thank you There is an entire forum here devoted to loading 9mm. Best to just click on over there and type 115 into the search window. Probably 1000 recipes for you to choose from Link to comment Share on other sites More sharing options...
KenLivingston Posted February 14, 2015 Share Posted February 14, 2015 115GR plated out of a G17 Powder Powder Charge Bullet OAL Crimp Primer Date QTY Chrono AVG SD spread Remarks Titegroup 4.3G Xtreme 115 RN 1.13 0.374 Wolf 1/30/15 10 1121 16.6 44 Test Link to comment Share on other sites More sharing options...
kaech Posted February 14, 2015 Author Share Posted February 14, 2015 115GR plated out of a G17 Powder Powder Charge Bullet OAL Crimp Primer Date QTY Chrono AVG SD spread Remarks Titegroup 4.3G Xtreme 115 RN 1.13 0.374 Wolf 1/30/15 10 1121 16.6 44 Test ^^^^^^Thanks, keep em coming guys :} Link to comment Share on other sites More sharing options...
kneelingatlas Posted February 14, 2015 Share Posted February 14, 2015 I was working up a production load for my XD Tactical (5inch) and I had a few bullets to try so I thought I would share the data in case it helps someone. Bullet - Montana Gold JHP 125 gr Powder - Titegroup - 4.0gr OAL - 1.125 Federal SPP Avg for three strings - 1118, 1119, and 1124 Lowest PF of 134.5 with an avg PF of 139.9 These had a high STDEV, not sure of reason, but they feel great and the gun loves them. Very accurate. Bullet - Zero 125gr JRN Powder - Titegroup - 4.0gr OAL - 1.120 CCI SPP Avg for two strings - 1134, 1123 Lowest PF of 139.25 with an avg PF of 140.4 The zeros felt exactly like the MG 125s and were just as accurate. I would let price decide this choice. Bullet - Montana Gold JHP 115gr Powder - Titegroup - 4.2gr OAL - 1.120 Federal SPP Avg for two strings - 1157, 1154 Lowest PF of 130.6 with an avg PF of 132.7 I didnt prefer the way the front sight came back with the 115 over the heavier 125s. For whatever reason they are not quite as accurate either, but accurate enough for certain. 4.5 grains of Tightgroup with 115 grain FMJ, OAL 1.100, pushes 1150 fps. Best Accuracy is 4.2 @1100 fps. 4.5 probably maxes SAAMI pressures 4.5 is a maximum load so use caution! I've used 4.6 gr titegroup with 115 gr berrys JRN bullets and a COL of 1.150 + .005 to get 1100fps + 30 fps but that is with a G17. At 5.0 grains I was seeing 1250 fps with the G17 just for reference. I don't have results with this load for my G34 gen4. Sorry, but I hope this helps. Just a few seconds of searching... Link to comment Share on other sites More sharing options...
Sarge Posted February 14, 2015 Share Posted February 14, 2015 I was working up a production load for my XD Tactical (5inch) and I had a few bullets to try so I thought I would share the data in case it helps someone. Bullet - Montana Gold JHP 125 gr Powder - Titegroup - 4.0gr OAL - 1.125 Federal SPP Avg for three strings - 1118, 1119, and 1124 Lowest PF of 134.5 with an avg PF of 139.9 These had a high STDEV, not sure of reason, but they feel great and the gun loves them. Very accurate. Bullet - Zero 125gr JRN Powder - Titegroup - 4.0gr OAL - 1.120 CCI SPP Avg for two strings - 1134, 1123 Lowest PF of 139.25 with an avg PF of 140.4 The zeros felt exactly like the MG 125s and were just as accurate. I would let price decide this choice. Bullet - Montana Gold JHP 115gr Powder - Titegroup - 4.2gr OAL - 1.120 Federal SPP Avg for two strings - 1157, 1154 Lowest PF of 130.6 with an avg PF of 132.7 I didnt prefer the way the front sight came back with the 115 over the heavier 125s. For whatever reason they are not quite as accurate either, but accurate enough for certain. 4.5 grains of Tightgroup with 115 grain FMJ, OAL 1.100, pushes 1150 fps. Best Accuracy is 4.2 @1100 fps. 4.5 probably maxes SAAMI pressures 4.5 is a maximum load so use caution! I've used 4.6 gr titegroup with 115 gr berrys JRN bullets and a COL of 1.150 + .005 to get 1100fps + 30 fps but that is with a G17. At 5.0 grains I was seeing 1250 fps with the G17 just for reference. I don't have results with this load for my G34 gen4. Sorry, but I hope this helps. Just a few seconds of searching... No, let's don't search. Let's just take up all the space and time to rehash. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now