What lead bullet does your glock feed well?

[GARD72977]

I have a Glock 34 with a KKM barrel. Im wanting to buy a new mold for my master caster. Looking at a 140-147gr bullet. What type of bullet feeds well in you glock. Im thinking I would like the JHP profile but would consider the RN. Just think the flat point will cut a cleaner hole in paper.

[Red Ryder]

So the real question is what bullets will your Kart barrel accept. Cause my stock Glock will eat, feed, and shoot garbage can lids if I fit them in the mag!

[GARD72977]

So the real question is what bullets will your Kart barrel accept. Cause my stock Glock will eat, feed, and shoot garbage can lids if I fit them in the mag!

Thanks that was a very helpful

[AHI]

The Magma 147 has never failed in my 34( will now).

[rhyrlik]

The KKM 9mm chamber is very generous. Mine accepts .359" 38/357 bullets and actually needs that size to prevent leading. I normally use 125gr TC FP .359" bullets on top of 3.5grs of bullseye @ 1.040" OAL.

[GARD72977]

I appreciate the information. It was a toss up between the 147gr and the 122gr FP . I changed my mind while I was on hold and ordered the 147gr BB mold. I have a 125gr RN so I would like to try the heavier bullet. I also ordered a .357 and .358 sizer die to try. Thanks again