550 mods

[rcc96]

Looking for some ideas to mount a 2"abs shute which would collect the finished round,dropping them into a bin underneath my loading bench.

Any suggestions / Any pictures?

Dave

[Alan550]

I'd be careful about dropping loaded rounds that far into a bin. With that much of a drop, you could set off one of your loaded rounds when the next one comes down the "chute".

Alan~^~

[XxWoodsHunterxX]

Looking for some ideas to mount a 2"abs shute which would collect the finished round,dropping them into a bin underneath my loading bench.

Any suggestions / Any pictures?

Dave

thats probably going to cause some round issues. Eventually

Sent from my iPad using Tapatalk HD

[Sarge]

To keep the rounds from dropping too far I always thought it would be cool to mount a drawer under the press. Just pull it out and scoop out the loaded rounds. Then again you could just stack the bucket on something to bring it up under the press higher. Probably be better to use tubing instead of PVC since it is softer. Don't use too big of a bucket either as they get pretty heavy if you go on a loading binge and lose track.

[pmt]

I've heard of people using a length of Tygon tubing to direct finished rounds into a bucket under their bench.