Any idea how to adapt Safariland holster for ELS fork?

[MickB]

Any ideas on how to adapt a 5198 Safarliand holster to take an ELS fork?

I run ELS forks bolted directly to Blade Tech holsters. and run them on one belt.

I would rather adapt a single Safariland holster than change everything to the QLS.

Should I just make an adapter plate out of kydex that I have lying around?

Or is there another soltion someone has come up with?

Mick

[GregSmith]

On my ELS set up, the holes of the QLS fork system lined up with 2 of holes on my els belt. (There just happened to be two holes a tiny bit closer on one section of the belt.) Using only 2 holes has stayed solid so far. I know other people have just drilled another hole into the belt and have had success.

[MickB]

Looks like my best option would be to simply get another Bladetech holster and bolt the ELS fork right up...

[1time]

I mounted the clip horizontal on the holster and belt. It works that way with the Safariland and Bladetech WRS

[HotLoad]

Els fork is kinda small and may not support a heavy gun. I drilled my belt and used a QLS with my bladetech holster.

[velo918]

ELS forks wasn't made for holsters, a QLS is made for the heavier weight and is very solid.