joaquino Posted January 4, 2005 Author Share Posted January 4, 2005 Hi Andreas, anything new about the mag's, how was the testing... Cheers Chris Link to comment Share on other sites More sharing options...
achard Posted January 4, 2005 Share Posted January 4, 2005 duh...how do i do that? i resized it to 65% for this post. should i resize it to 50? 9mx You can have bigger pictre like 4x6 and just set the image resolution to 72 dpi/ppi. andreas, where can we get the mag? rich Link to comment Share on other sites More sharing options...
9MX Posted January 4, 2005 Share Posted January 4, 2005 achard, thanks! figured that one out last year Link to comment Share on other sites More sharing options...
hdgun Posted January 4, 2005 Share Posted January 4, 2005 9MX, I just built a modified gun just like the one in the picture you posted. I used a Caspian wide body instead of the S_I or SPS. I live in the States, We do not have modified div here. I built it because I like the concept of the gun. (rambling) I was wondering if you had the particulars of the gun. What loads are used? How does it handle? Right now I am using a 155 west coast bullet with 9.0 HS-6 gives me just under 170 pf. I am open to any load sudgestions (spelling). Thanks, John Link to comment Share on other sites More sharing options...
Eye Cutter Posted January 4, 2005 Share Posted January 4, 2005 my team mates use 7.4-7.5 gr of vihtavuori 3N37 powder and 180 gr copper plated heads Link to comment Share on other sites More sharing options...
Julien Boit Posted January 5, 2005 Share Posted January 5, 2005 I've used 5.7 grains of Vectan A1 behind a 180 grs FMJ Armscor. Gave me a nice 174 PF , OAL was 1.170 and the barrel was a Hybrid Schuemann Commander length with 4 ports. Link to comment Share on other sites More sharing options...
joaquino Posted January 5, 2005 Author Share Posted January 5, 2005 my team mates use 7.4-7.5 gr of vihtavuori 3N37 powder and 180 gr copper plated heads @John I recently made a test lot with 180 copper plated .401 and .402 dia H&N bullets with 5.0grain N320 for my 4.5” three hole ported SPS modified blaster. PF was 174 and very soft and flat to shoot but the big problem I found with this type bullets which work usually perfect in my limited 5" gun (only difference is that I use 220grain for limited and 4,6grain N340) was that they are to soft and to fast so they are going straight thru the barrel without getting the rotation . Next week I'm going to try PMC 165grain FMJ-TC bullets which were recommended by the guy who sold me the gun... I'll post the results after testing Cheers Chris BTW see the following threat http://www.brianenos.com/forums/index.php?showtopic=18671 Link to comment Share on other sites More sharing options...
hdgun Posted January 5, 2005 Share Posted January 5, 2005 So the 180gr bullets are the way to go? I will have to try some. Have you guys played with lighter bullets? How did they copare to heavier ones? Love the input guys,please keep it coming. Thanks, John Link to comment Share on other sites More sharing options...
Julien Boit Posted January 5, 2005 Share Posted January 5, 2005 I've tried some 155 grs. It was way to loud to go for the PF and the accuracy was not what I expected. I sticked with the 180 grs because it was the only thing I have to change between my standard load (170 grs and 5.7 grains of Vectan A1) and the Modified load (180 grs and 5.7 grains of Vectan A1). It was that simple for me The accuracy was pretty good and the load was clean. Link to comment Share on other sites More sharing options...
mcoliver Posted January 6, 2005 Share Posted January 6, 2005 Hey Julien, with that low a powder charge, is there still enough gas to work the ports effectively? Link to comment Share on other sites More sharing options...
Julien Boit Posted January 6, 2005 Share Posted January 6, 2005 A1 is a fast burning powder. I found that the pistol was nice to shoot and the ports were working good with that powder. I think slower powder wouldn't work as well because of the short barrel's length. A friend with the same set up, tried SP2, Ba9 and some Vihtavuoris and finally selected A1 and 180 FMJ too. It worked ok and allowed me to rationalize my loads, same powder, cases, OAL, primers, different bullet. Link to comment Share on other sites More sharing options...
9MX Posted January 6, 2005 Share Posted January 6, 2005 9MX, I just built a modified gun just like the one in the picture you posted. I used a Caspian wide body instead of the S_I or SPS. I live in the States, We do not have modified div here. I built it because I like the concept of the gun. (rambling) I was wondering if you had the particulars of the gun. What loads are used? How does it handle? Right now I am using a 155 west coast bullet with 9.0 HS-6 gives me just under 170 pf. I am open to any load sudgestions (spelling). Thanks, John my friend's load is 5.4gr N340 180 gr fmj. this weekend he will try 7.8 gr 3n37 187 gr head Link to comment Share on other sites More sharing options...
mcoliver Posted January 6, 2005 Share Posted January 6, 2005 Okay Thanks. Link to comment Share on other sites More sharing options...
hdgun Posted January 14, 2005 Share Posted January 14, 2005 I just tried T-G wow!!!! 5gr T-G with 180 West Coast gave me a 168pf very soft. gun is: 5" Caspian widebody with a 6 port hybrid barrel and a low mount Optima Link to comment Share on other sites More sharing options...
Eye Cutter Posted January 14, 2005 Share Posted January 14, 2005 hdgun: post pics of your modified pistol if you can! Link to comment Share on other sites More sharing options...
hdgun Posted January 15, 2005 Share Posted January 15, 2005 I will try to get one posted today. Link to comment Share on other sites More sharing options...
Eye Cutter Posted January 16, 2005 Share Posted January 16, 2005 Here's hdgun's modified pistol. Nice! Link to comment Share on other sites More sharing options...
hdgun Posted January 16, 2005 Share Posted January 16, 2005 Eye Cutter, Thanks for the posting. This Modified gun is built in a Caspian frame with all the goodies. The slide is still in the white, till I get all the bugs out.(Very soon now). 5grs of T.G. with 180 West Coast Bullet is the cats ass from this blaster. Link to comment Share on other sites More sharing options...
joaquino Posted January 18, 2005 Author Share Posted January 18, 2005 As promised, tested two loads with PMC TC-FMJ 165gr bullets, Federal SP200 Primers, OAL 1.160(1) 5.9gr N320 PF178 nice and Flat (2)7.1gr N340 PF 180 nice and flat too but very load. Cheers Chris BTW Guns was the SPS Modified 4.5" 3 ports Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now