Bam air soft targets

[Dragon11]

I recently acquired some Bam airsoft targets. I'm curious what you guys use to attach the targets to PVC piping, in order to make the stands. I looked around the local hard ware store today looking at things. But, before purchasing some stuff I wanted to know if anybody had any ideas. I though I saw where you can purchase some PVC attachment plates from Bam, but was looking at doing it on my own.

[ktm300]

I found a PVC piece that fits over a piece of 2" pipe and has three ears so you can attach it to the bottom of the bam target. I got them from http://pvcfittings.com/

Here is a link to the page that has the fitting.

http://flexpvc.com/cart/agora.cgi?cart_id=4266734.21135&product=PVC-Caps-Mounting

I used

http://flexpvc.com/cart/agora.cgi?product=PVC-5-ways-side-outlet-Cross

for the base

[Dragon11]

I found a PVC piece that fits over a piece of 2" pipe and has three ears so you can attach it to the bottom of the bam target. I got them from http://pvcfittings.com/

Here is a link to the page that has the fitting.

http://flexpvc.com/cart/agora.cgi?cart_id=4266734.21135&product=PVC-Caps-Mounting

I used

http://flexpvc.com/cart/agora.cgi?product=PVC-5-ways-side-outlet-Cross

for the base

That's what I needed. Not that I expected to see them there, but I went to Lowes and didn't see any of those fittings. Thanks for the help.

[sfran943]

I use a regular target stand with a USPSA or IDPA carboard target. Then I tape the box top from a copy paper box to the back to trap the air soft BB's. Works like a charm.