blueorb Posted June 18, 2013 Share Posted June 18, 2013 Hi all. I just ran out of my MG bullets and was able to order 3000 147gr FP Bayou Bullets. Now I need to come up with a load, or at least a place to start. I did a search but an not finding a lot on the internet specifically about Bayou's and WSF. I will shooting these out of a CZ and, since these are FP bullets, I will be loading a little shorter than I normally did with my RN MG's. The best load that I have run across so far is 3.6gr of WSF at a AOL of 1.115. I ran my 147gr MG's at 4.2gr of WSF at an AOL of 1.135 (or there abouts). Anyone have any experience with Bayou's and WSF powder? Thanks. Link to comment Share on other sites More sharing options...
Croomrider Posted June 18, 2013 Share Posted June 18, 2013 Just figure out what OAL will work for those bullets in your mags and chamber, back off .010-.020 and use that. Start around the 3.6 grains you mentioned and work up to the velocity you need with a chrono. There are no magic loads. This will give you a good custom load for your application. Mike Link to comment Share on other sites More sharing options...
doubleaay78 Posted June 19, 2013 Share Posted June 19, 2013 147 Bayou with 4.0 of WSF at 1.14" OAL makes 132 PF in a G34. Link to comment Share on other sites More sharing options...
shtr3 Posted June 19, 2013 Share Posted June 19, 2013 Call donnie back at bayou bullets and he will set u up with all the coreect information. Great guy. Cant go wrong with bayou bullets!!!@! Sent from my SAMSUNG-SGH-I747 using Tapatalk 4 Beta Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now