bodene 5 Posted May 16, 2013 Share Posted May 16, 2013 anyone use this with success and if so what powder ? steel match load mp fs Link to comment Share on other sites More sharing options...
Croomrider Posted May 16, 2013 Share Posted May 16, 2013 There is no reason that bullet wont work if the sizing and harness of the lead will work with your barrel. Almost any load that will work with moly or jacketed in the same weight bullet will work with the lead but you may be able to reduce the load a couple of tenths and still get the same velocity. Some powders like Tightgroup may produce more smoke than others with lead, so keep that in mind. Mike Link to comment Share on other sites More sharing options...
tac_driver Posted May 18, 2013 Share Posted May 18, 2013 Firearm: Glock 19 Case: Winchester C.O.L.: 1.115 Primer: WolfSP Powder: BE Weight: 3.5Bullet: Missouri Type: LFP Weight: 147Grs. PF: 144 AVG: 977.4 SD: 13.03 Link to comment Share on other sites More sharing options...
njl Posted May 19, 2013 Share Posted May 19, 2013 I recently tested some 147gr FP moly coated lead. I used WST at 3.2, 3.5, and 3.6gr. From a G17, I got avgs of 850, 896, and 917fps in 10 shot strings. Link to comment Share on other sites More sharing options...
Jacksonj Posted May 20, 2013 Share Posted May 20, 2013 I use 3.9 grs Unique for my 147 gr LFP's in my Glock 17 & 19 with great results. (Lone Wolf barrels). I have load data for using VV N320 and Alliant American Select...but due to my work schedule and match schedule I probably won't be able to get those tweaked out until sometime in June. Link to comment Share on other sites More sharing options...
Klemmer Posted May 22, 2013 Share Posted May 22, 2013 I shot a thousand of these last year as an experiment. Used Solo 1000. Don't remember the powder charge weight. They shot OK but ran kinda smoky from the lube. I went back to jacketed 147s. Link to comment Share on other sites More sharing options...
Wahoo95 Posted May 23, 2013 Share Posted May 23, 2013 I run 147gr Dardas LFP over 3.5gr of Solo 1000 Link to comment Share on other sites More sharing options...
Wahoo95 Posted November 6, 2013 Share Posted November 6, 2013 I run 147gr Dardas LFP over 3.5gr of Solo 1000 Same load I use Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now