Eaa flat trigger , hammer and sear kit install issues

[Mlussoro]

So I recently bought a

Flat trigger single action , egw hammer sear and firing pin kit had it all installed and works great till the slide is installed then, nothing trigger won't fire? Any thoughts

[jmbaccolyte]

What model EAA/Tanfoglio do you have? Which EGW parts were installed (Henning's Ultimate Prepped Trigger Kit - Large Frame (includes EGW Prepped Hammer, Prepped Sear, Henning X-Long Firing Pin, Wolff Hammer Spring) or the older unmodified EGW parts? Did you or the gunsmith adjust the pre-travel and over-travel settings (if your model has them)? Is the person that installed the parts familiar with EAA/Tanfoglios?

Someone here with more experience will help you, but they may need more information.

[kneelingatlas]

Did you adjust per/over travel with the slide off? If so that's why. The screws have to be adjusted with the slide on and the hammer cocked by racking the slide, not just cocking it with your thumb. The slide racking effects the reset.

Edited April 19, 2013 by kneelingatlas

[kneelingatlas]

I'll bet dollars to donuts that if you back out the screws it'll work.

[Mlussoro]

Eaa witness 40 with wonder finish, egw prepped kit, yes gunsmith did the work, and have worked on a few tangs in the past, I will check back today and see what he found out thanks guys for the info