Aftermarket Gen4 trigger in a Gen3?

[sousa]

I know it's a weird question, but I have a chance at a full Glockworx fulcrum trigger kit for a Gen4 for a REALLY good price. Would it work in my Gen3? Any issues that anyone is aware of?

[MrVvrroomm]

It will work just fine. You'll have to get yourself a new trigger mechanism housing w/ejector. That part is like $7.

Edited February 4, 2013 by MrVvrroomm

[sousa]

Cool thanks!

[rpd]

With the stock trigger mechanism housing w/ejector you lose the ability to adjust overtravel, one of the added benefits of the fulcrum. It's entirely up to you if that's important or not. You might be able to pick up a gen 3 modified trigger mechanism housing only. More $ than the stock part, but again only you can decide if it's worth it. Either way, fulcrum trigger is sweet.

[MrVvrroomm]

If you're even a bit handy you'll be able to put the over-travel set screw in your new trigger mechanism housing.

[Ultimo-Hombre]

Zev sells just the housing for the gen 3 with the over travel screw. $20 and swap it out and you are in business!

[Tyro Shooter]

If you have a Fulcrum Ultimate kit for a Gen 4 it will work in a gen 3 . . . you just have to use the original ejector housing.

1: take out old trigger

2:strip old Gen 3 ejector housing of Spring and connector.

3: replace with parts from Gen 4 trigger kit

4: reassemble trigger and re-install.

5: install the striker and FPS IN A CLEAN SLIDE!!!

6: reassemble, test for function, safety's and reset, lube, load and enjoy

if there are any questions issues or problems

just call us here at Glockworx.