Jimbo76 Posted January 29, 2013 Share Posted January 29, 2013 Using PDelta JHP my 9mm Eagle won't feed these in 124 grain. My Steelmaster runs fine with them. Wondering what oal works best with this setup. I use the same mags in each gun too. Any ideas? I just ordered an Aftec for it. It seems like the lower front edge of the hollowpoint is hitting something. It just sticks and the round is horizontal. Link to comment Share on other sites More sharing options...
sludwin Posted February 8, 2013 Share Posted February 8, 2013 almost any of my sti 2011's were finiky at some point with ammo, i usually polish the feed ramp and then tune my mags with the dawson kit and have no problems after that.... Link to comment Share on other sites More sharing options...
CB45 Posted February 9, 2013 Share Posted February 9, 2013 Will it feed factory or FMJ? It could be an extractor tuning issue. A properly installed Aftec could resolve your issue, or maybe not? Link to comment Share on other sites More sharing options...
RH45 Posted February 9, 2013 Share Posted February 9, 2013 Are you using factory ammo, or reloads, if reloads, what OAL? 2011s are kind of funny with short loads, some run, some NEED to be loaded long. Link to comment Share on other sites More sharing options...
DRobson Posted February 11, 2013 Share Posted February 11, 2013 I loaded up a few hundred of the PD 124JHP's at 1.125 and they worked great in my stock STI edge Link to comment Share on other sites More sharing options...
sludwin Posted March 20, 2013 Share Posted March 20, 2013 definately start with polishing the feed ramp and tune the mags..... thats the firs thing i do now on all my sti's Link to comment Share on other sites More sharing options...
bonglee0507 Posted May 1, 2013 Share Posted May 1, 2013 definately start with polishing the feed ramp and tune the mags..... thats the firs thing i do now on all my sti's Fired 200 rds of federal hydra shok on my edge after polishing the feed ramp. No issues Sent from my iPhone 5 using Tapatalk 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now