dukeguy Posted September 13, 2012 Share Posted September 13, 2012 Need a little direction. My Henning trigger in my Witness Match 9mm has started to bind up, making it sticky to pull and even stickier to reset. I've read up on a couple of threads here and it seems the trigger plunger is the issue. I have shortened the existing spring by cutting off one loop and it seems to have cured the problem. (I'm open to any other advice!) Now I would like to replace the trigger plunger spring. Henning has 4 springs listed - 19#, 20#, 21# 22#. Are they different lengths, or just different weight or resistance? How do I know which one I should choose? They are all listed for light loads, which is what I shoot with this gun. Thanks in advance for any help you can give! Link to comment Share on other sites More sharing options...
CHA-LEE Posted September 14, 2012 Share Posted September 14, 2012 I usually use the #20 in my single action pistols.For the DA/SA pistols you may need to use a #21 or #22 due to the increased trigger travel needed during the DA pull. Link to comment Share on other sites More sharing options...
dukeguy Posted September 15, 2012 Author Share Posted September 15, 2012 I usually use the #20 in my single action pistols.For the DA/SA pistols you may need to use a #21 or #22 due to the increased trigger travel needed during the DA pull. Thanks Cha-Lee. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now