C-More on 10/22

[Seale]

I mounted a railway on a 10/22 using a typical weaver base. Now my cheekweld places my eye to low to see the dot. I found where Allchin makes a flat plate to mount the same set up, lowering the dot.

Anyone using this set up on a thumb hole type stock? (Higher comb than a factory stock) Curious if this puts the dot at a more useable height. (Yes I know this is subjective.)

Anyone using another choice for same?

[kmca]

If it were me, I'd raise the stock. If you have the ability and tools to make the hardware, it's fairly inexpensive and easy to do. If you have to buy the hardware:

http://www.brownells.com/.aspx/pid=6805/Product/ADJUSTING-STOCK-HARDWARE

Bondo is another alternative, if you have a painted stock, it's easy, if not, it takes a lot more care.

Edited July 16, 2012 by kmca

[Retread1911]

What you need is a new mount. Check this one out.

http://www.allchingunparts.com/details.php?prodId=43&category=2&secondary=&keywords='>http://www.allchingunparts.com/details.php?prodId=43&category=2&secondary=&keywords=

May not have pasted correctly

http://www.allchingunparts.com

Let me know if you cannot find it.

Retread

[z40acp]

The answer to which way is correct depends on the position of your head with the C-more where it is now.

[Ming the Merciless]

I mounted a railway on a 10/22 using a typical weaver base. Now my cheekweld places my eye to low to see the dot. I found where Allchin makes a flat plate to mount the same set up, lowering the dot.

Anyone using this set up on a thumb hole type stock? (Higher comb than a factory stock) Curious if this puts the dot at a more useable height. (Yes I know this is subjective.)

Anyone using another choice for same?

I use the Alchin mount with a thumbhole stock and the mount was very slightly too low, so I put a 1/4" thick spacer between the C-More and the mount made from 1" wide hardware store aluminum stock trimmed to match the outline of the Alchin mount.

Edited July 16, 2012 by Ming the Merciless

[Seale]

Ming- That sounds like what Im wanting. Its a lot easier to raise it a little if needed.

Retread- Thats the one I was looking at. Was hoping someone here was using it.

Thanks.

Edited July 17, 2012 by Seale

[JimmyZip]

I bought the Archangel stock for my daughters and put one on it. It seems to be good for all who shoot it. The adjustable stock kicks butt too. From my 10 year old to my, we can adjust and shoot together, no problem. Just shoot heads-up. Its awesome!

[Retread1911]

Ming- That sounds like what Im wanting. Its a lot easier to raise it a little if needed.

Retread- Thats the one I was looking at. Was hoping someone here was using it.

Thanks.

Mine is on order and t he two open rimfire shooters one state champ and one Top 10 shooter both use the mount.

Hope you like it.