SteveU Posted March 9, 2012 Share Posted March 9, 2012 After a few different configurations, I settled on this load: Zero 125 jhp OAL 1.132 VVN320 4.1 grains Mixed brass WSP 16 rounds: Average velocity: 1078 fps. PF 134 Highest was 1105 Lowest was 1019 These were both outliers: There were 9 with velocities between 1076 and 1084. (cheap chrono and statistics was too long ago to calculate SD) This is an accurate and comfortable load. Good slide speed. I like it better than my 147 9mm load. Hope that gives others a place to start with this component combination. Link to comment Share on other sites More sharing options...
1SOW Posted March 10, 2012 Share Posted March 10, 2012 (edited) CZ75B, 4.72" bbl Zero (.356 dia) 125JHP n320 ,3.9 grs, 1.10 (short chamber) WIN cases Fed SPP avg. 1034fps, 129 PF, 34ES (4.0grs=133 PF) CE Pro-Digital Chrono FWIW: My B shoots these 20-25'/min faster than my son's 'newer' CZ SPO1 Shadow does. His reloads are also faster in my B. Edited March 10, 2012 by 1SOW Link to comment Share on other sites More sharing options...
RH45 Posted March 10, 2012 Share Posted March 10, 2012 M&P Pro, 5" Zero 125 grain, .356, jhp Once-fired Winchester brass 4.2 grains of 320 Federal primers OAL 1.2" Was averaging 1050 fps on my chrono, but, came in at 130pf at last years IDPA state match. Link to comment Share on other sites More sharing options...
cellguy030 Posted March 14, 2012 Share Posted March 14, 2012 After a few different configurations, I settled on this load: Zero 125 jhp OAL 1.132 VVN320 4.1 grains Mixed brass WSP 16 rounds: Average velocity: 1078 fps. PF 134 Highest was 1105 Lowest was 1019 These were both outliers: There were 9 with velocities between 1076 and 1084. (cheap chrono and statistics was too long ago to calculate SD) This is an accurate and comfortable load. Good slide speed. I like it better than my 147 9mm load. Hope that gives others a place to start with this component combination. Do you load your mags to capacity? I have had to shorten my OAL to 1.07 because the rounds at the bottom of my mags were getting compressed and bulging out the brass and causing massive death jams. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now