RickyH Posted August 13, 2011 Share Posted August 13, 2011 I have a SVI 140mm mag with grams parts that when I use it after the one shot the trigger will not reset I half to tap the bottom of the mag for each shot what do I need to do Link to comment Share on other sites More sharing options...
Aircooled6racer Posted August 13, 2011 Share Posted August 13, 2011 Hello: Sounds like the mag is too wide and hitting the trigger bow. Sight down from the top with the slide off and see if it is touching the trigger bow. If it is you may have to move the trigger bow out some or modify the mag. Hope this helps. Thanks, Eric Link to comment Share on other sites More sharing options...
Kriojas Posted August 13, 2011 Share Posted August 13, 2011 Do you have a svi or sti frame? What Eric is saying sounds right to me. Most times the trigger bow itself needs to flexed a little more into the groove. You can also apply slight pressure with a vise to the area of the mag. Slightly is the big thing to much can damage the mag body. Link to comment Share on other sites More sharing options...
RickyH Posted August 13, 2011 Author Share Posted August 13, 2011 I have a STI frame. It does not happen with any of my other mag. Thanks I will check the trigger bow Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now