Artsville Posted January 18, 2011 Share Posted January 18, 2011 How about load data for production shooters who load with a shorter oal all in one place? 165gr plated 4.5gr N320 1.126 4"xd 852fps pf 140 i shoot minor.... I am switching now to MG 180gr JHP....will need a starting point. Let see some data..... Art Link to comment Share on other sites More sharing options...
Sarge Posted January 18, 2011 Share Posted January 18, 2011 This should probably be in the .40 reloading section. I assumed it would be 9mm. Link to comment Share on other sites More sharing options...
G-ManBart Posted January 19, 2011 Share Posted January 19, 2011 At short (i.e. factory) OAL, you can just use published data and be fine. R, Link to comment Share on other sites More sharing options...
Artsville Posted January 19, 2011 Author Share Posted January 19, 2011 This should probably be in the .40 reloading section. I assumed it would be 9mm. I almost did that but thought there were probably 9s and 40s....... Link to comment Share on other sites More sharing options...
kevin c Posted January 21, 2011 Share Posted January 21, 2011 (edited) At short (i.e. factory) OAL, you can just use published data and be fine. R, +1 180 MG JHP over 3.2 Clays at 1.135 = ~137 PF through my G35 w/ stock bbl. 147 MG CMJ over 3.7 N320 at 1.125 = ~140 PF through my G34 w/ stock bbl. 147 Bear Creek Moly over 3.2 TG at 1.100 = ~135 PF through the same gun (tumbles, though). 147 Precision Moly over 3.4 TG at 1.135 = `137 PF through the same gun. YMMV Edited January 21, 2011 by kevin c Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now