treefarmer Posted November 13, 2010 Share Posted November 13, 2010 Need more help. Will i harm my revolver, with a hammer mounted firing pin, by dry firing it? Link to comment Share on other sites More sharing options...
Carmoney Posted November 13, 2010 Share Posted November 13, 2010 Nope. Link to comment Share on other sites More sharing options...
MrBorland Posted November 13, 2010 Share Posted November 13, 2010 Dry-fire per se won't hurt, but it's my understanding that hammer-mounted firing pins are more sensitive to bending or breakage than their frame-mounted counterparts if dry-fired repeatedly without snap caps. Anything to this, Mike? Link to comment Share on other sites More sharing options...
Bubber Posted November 13, 2010 Share Posted November 13, 2010 (edited) I have heard of the firing pin spring collapsping after a lot of dry firing, But this Kid is a fanatic and Dry fires quite abit. He takes out the fp and spring to dry fire and then puts it back in before he goes to live fire. Edited November 13, 2010 by Bubber Link to comment Share on other sites More sharing options...
Carmoney Posted November 13, 2010 Share Posted November 13, 2010 Dry-fire per se won't hurt, but it's my understanding that hammer-mounted firing pins are more sensitive to bending or breakage than their frame-mounted counterparts if dry-fired repeatedly without snap caps. Anything to this, Mike? Nope. All of my original competition revolvers had the hammer nose. I dry-fired them all rather extensively back in the day, when I had time for that sort of thing, with absolutely no sign of trouble. I have seen a couple broken hammer noses on other people's guns, but only a couple. I've seen a picture of a bent one on the internet. I don't worry about it a bit. Link to comment Share on other sites More sharing options...
MrBorland Posted November 13, 2010 Share Posted November 13, 2010 Bubber - you're talking about a frame-mounted pin, right? My spring's disintegrated on me as well. The pin itself is fine, though. I was thinking more about the pin on a hammer-mounted set-up. The pin isn't perpendicular to the primer face as it travels though it's arc, but swivels to get there at the end of it's travel. My understanding was that without something to meet the pin, it'll bang the firing pin opening, damaging it or enlarging the hole eventually. Tom Link to comment Share on other sites More sharing options...
treefarmer Posted November 13, 2010 Author Share Posted November 13, 2010 Thanks for all input Guys Much appreciated! Roger Link to comment Share on other sites More sharing options...
Bubber Posted November 13, 2010 Share Posted November 13, 2010 Bubber - you're talking about a frame-mounted pin, right? My spring's disintegrated on me as well. The pin itself is fine, though. I was thinking more about the pin on a hammer-mounted set-up. The pin isn't perpendicular to the primer face as it travels though it's arc, but swivels to get there at the end of it's travel. My understanding was that without something to meet the pin, it'll bang the firing pin opening, damaging it or enlarging the hole eventually. Tom Tom, Goofy me I was speaking of the frame mounted pin. I haven't heard of the firing pin bushing being harmed on either model. later rdd Link to comment Share on other sites More sharing options...
SeaTact Posted November 13, 2010 Share Posted November 13, 2010 Dry-fire per se won't hurt, but it's my understanding that hammer-mounted firing pins are more sensitive to bending or breakage than their frame-mounted counterparts if dry-fired repeatedly without snap caps. Anything to this, Mike? This is helpful. I was given a 38 special S&W snubbie as a gift, but I know next to nothing about revolvers. Is this kind of revolver OK to dry fire? Is it a hammer-mounted firing pin? Link to comment Share on other sites More sharing options...
Tom E Posted November 13, 2010 Share Posted November 13, 2010 you're talking about a frame-mounted pin, right? My spring's disintegrated on me as well. The pin itself is fine, though. Dry firing without snap caps the C&S extended firing pins will wad up the firing pin spring. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now