imhntn Posted May 3, 2010 Share Posted May 3, 2010 (edited) I have been practicing with my cz sp-01 shadow with the kadet kit .22 conversion on some steel. I can not get the pistol with the conversion on it into my blade-tech doh holster. Anyone run into this and have an idea on a holster that will work? The gun is just a little too tall to fit the blade-tech. Edited May 3, 2010 by imhntn Link to comment Share on other sites More sharing options...
Walküre Posted May 3, 2010 Share Posted May 3, 2010 I ran into this issue as well. When I bought my Kadet kit some time ago, I noticed that my standard B wouldn't fit its holster with the kit on; I assumed that the profile was probably different, and figured that when I started running a SP-01/Shadow there wouldn't be a problem. Fast-forward to getting my Shadow & DOH, only to find that the Shadow-Kadet setup doesn't fit its holster either. I haven't found any solution so far. If I want to run my Kadet kit from a holster, I have to use my Limited rig. (And unfortunately, you can't run a Kadet on a TS, so I can't even use my Limited gun with such a setup. ) Link to comment Share on other sites More sharing options...
chirpy Posted May 3, 2010 Share Posted May 3, 2010 Try contacting Blade-Tech to see if they have a solution/recommendation. Richard Link to comment Share on other sites More sharing options...
dr2e Posted May 3, 2010 Share Posted May 3, 2010 (edited) i did have to loosen it but my shadow with the .22 top end fit my blade-tech... Edited May 3, 2010 by dr2e Link to comment Share on other sites More sharing options...
The Antichrome Posted May 3, 2010 Share Posted May 3, 2010 I have been practicing with my cz sp-01 shadow with the kadet kit .22 conversion on some steel. I can not get the pistol with the conversion on it into my blade-tech doh holster. Anyone run into this and have an idea on a holster that will work? The gun is just a little too tall to fit the blade-tech. Theres a couple of guys around that could custom build one...you'd have to leave the gun with them for a day or so. Link to comment Share on other sites More sharing options...
imhntn Posted May 4, 2010 Author Share Posted May 4, 2010 I have been practicing with my cz sp-01 shadow with the kadet kit .22 conversion on some steel. I can not get the pistol with the conversion on it into my blade-tech doh holster. Anyone run into this and have an idea on a holster that will work? The gun is just a little too tall to fit the blade-tech. Theres a couple of guys around that could custom build one...you'd have to leave the gun with them for a day or so. Are you thinking of the guy on okshooters that was advertising it? Thanks for the info guys. Link to comment Share on other sites More sharing options...
J.Schmitt Posted June 4, 2010 Share Posted June 4, 2010 The blade tech molds very well with a little heat applied. use your oven or a heat gun. Oven at about 200 degrees. Once the kadet fits all you will probably have to do is tighten the screws so your comp gun fits. I/m working on getting a kadet and will have to deal with this soon. I have remolded other items in the past. Jay Link to comment Share on other sites More sharing options...
NOSAJ19 Posted June 5, 2010 Share Posted June 5, 2010 I use a ghost holster for my CZ75 SP01, with & without .22 kadet conversion. No worries. I have used CR Speed holster also, but it requires the cup platform, for use with both calibers without holster adjustment. Unfortunately, not kydex & not USPSA PD legal. I shoot IPSC, so no issue here. Cheers, Ando. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now