Any load data for 9mm MG 124gr with WSF?

[rvbgtr]

Found some data on Hodgdon's web site for 1.169. Wondering if anyone had any other data for MG 124gr CMJ. Looking to maintain 130pf. Thanks,

Edited April 16, 2010 by rvbgtr

[8ring]

Depending on the length of your barrel, 4.8 to 4.9 grs of Super Field should do it for a MG round nose bullet. The hollow point has a longer bearing surface and may take another tenth grain or so. My loads were Winchester cases and Win small pistol primers.

Chris

[rvbgtr]

8ring,

Thanks, what OAL are you using?

Thanks,

[MarkCO]

5.3" Lone Wolf barrel in a Glock, WSP primers, Win brass, 1.140" OAL, 5.0 grains WSF gives me 1050 fps which is right at 130 pf.

[Darrell]

Found some data on Hodgdon's web site for 1.169. Wondering if anyone had any other data for MG 124gr CMJ. Looking to maintain 130pf. Thanks,

M. G. CMJ 147 WSF 3.30 Magtec W/W 1.100 687 85 23 101.0 1.65 3-5 shot group @ 20 yds

M. G. CMJ 147 WSF 3.50 Magtec W/W 1.100 712 106 29 104.7 1.84 3-5 shot group @ 20 yds

M. G. CMJ 147 WSF 3.70 Magtec W/W 1.100 764 81 22 112.3 1.62 3-5 shot group @ 20 yds

M. G. JHP 124 WSF 4.50 Magtec Fed 1.075 996 61 16 123.5 1.78 15.00 3-5 shot group @ 25 yds

M. G. JHP 124 WSF 4.70 Magtec Fed 1.075 1041 41 12 129.1 1.93 15.00 3-5 shot group @ 25 yds

M. G. JHP 124 WSF 4.90 Magtec Fed 1.075 1064 131.9 1.75 15.00 3-5 shot group @ 25 yds

M. G. JHP 124 WSF 5.10 Magtec Fed 1.075 1121 33 8 139.0 2.54 15.00 3-5 shot group @ 25 yds

[rvbgtr]

Thanks guys