triplesinglestack Posted February 16, 2010 Share Posted February 16, 2010 I have been searching for several days on these forums and can' seem to find any rules for the USPSA paper targets, as far as: how much can be covered w/no shoot, how much has to be exposed, also does there need to be a visible divider between targets when shared on a stand? if I am in the wrong sub forum, please point me in the right direction, thanks Jason Link to comment Share on other sites More sharing options...
bbbean Posted February 16, 2010 Share Posted February 16, 2010 http://www.uspsa.org/rules/2008HandgunRulesindexed.pdf Chapter 4 and Appendix B. Link to comment Share on other sites More sharing options...
LPatterson Posted February 16, 2010 Share Posted February 16, 2010 (edited) 4.2.5 and note at bottom of Appendix B3 or B2 for a turtle. Keyboard whipped again. Edited February 16, 2010 by LPatterson Link to comment Share on other sites More sharing options...
triplesinglestack Posted February 16, 2010 Author Share Posted February 16, 2010 dang you fellas are fast, thank you very much- Link to comment Share on other sites More sharing options...
triplesinglestack Posted February 16, 2010 Author Share Posted February 16, 2010 Also I was torn w/posting my question here or USPSA rules? did I make the proper choice? Link to comment Share on other sites More sharing options...
Flexmoney Posted February 16, 2010 Share Posted February 16, 2010 Most rules can be found in the rule book. (Every member gets a book mailed to them, but the online version is nice because it has a search feature.) Most rule questions go best in the rules forum. This one is fine here, though. It might turn into a "best practices" thread on target presentation. (which is probably what you are ultimately after?) Link to comment Share on other sites More sharing options...
triplesinglestack Posted February 16, 2010 Author Share Posted February 16, 2010 EXACTLY, what I am after- BTW have the newest copy on my coffee table at home I would be interested in some actual photos of some nicely made up targets, for our indoor range I saw a few nice ones that had a no shoot and 4 targets on one stand, I might use next week, but always looking for more ideas thanks Jason Link to comment Share on other sites More sharing options...
LPatterson Posted February 17, 2010 Share Posted February 17, 2010 Something we forgot to mention is that you want to overlap at a perf, shoot and no shoot targets but shoot targets should be separated enough that a bullet can not score on both. Say 1/2" between perf's. Link to comment Share on other sites More sharing options...
Jim Norman Posted February 17, 2010 Share Posted February 17, 2010 The TFH that covered lining up perfs and whether or not the portion of the scoring target covered existed or not and was the edge of that covered portion a scorable hit or not has caused me to rethink target alignments. Except on a classifier, since they are prescribed set-ups we no longer align on the perf. We now deliberately misaligne by more than 1/2 inch so that there is never a question. Your bullet hole is entierly in or entirely out of a particular scoring or penalty area. No discussion required about perfs and tangents and covered areas. As for setting up multiple targets on one stand; make up several complete matching sets that can be changed out in their entirety as opposed to trying to insert a target into an array. An ideal tool for this is a bag stapler. You can also use a hot-melt glue gun. Jim Link to comment Share on other sites More sharing options...
Flexmoney Posted February 17, 2010 Share Posted February 17, 2010 Yeah, multiple targets on one stand is a pro move. You will likely have to replace targets during the match, and you need to be able to replace them with the exact same setup (even if the target sticks get shot off). Link to comment Share on other sites More sharing options...
triplesinglestack Posted February 17, 2010 Author Share Posted February 17, 2010 great ideas-thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now