-
Posts
136 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by Ner
-
-
1 hour ago, Racinready300ex said:
I'm running a JP bolt, didn't come with a weight.
Based on what I see, target S had less dot movement. The hits seem a little better but don't really show the difference. My perception was the dot was moving less with that setup.
is it a Hydra ?
-
The next question is..The bolt weight ..in or out ?
-
-
it is always the same pack of problems
• disconnector little f*#ker spring (should be changed once a year) especially ECL
• firing pin + spring (should be changed once a year)
• too long/short stroke can cause a list of problems
-
+1 to ECL's disconnector
-
i would prefer my gun to shoot 100% when i would need that
-
3 hours ago, ezra650 said:
Ah so you are really trying to solve the issue for her. It drives her crazy and then she drives you crazy. Now we get the full story
I guess if I cared enough on mine I would take the shuttle apart and lightly/sand file the shuttle where it rides on the platform and station 1 locator. Could be a high spot on it. Hope you get it more quiet!it become even louder!:D wife sends you her regards
-
30 minutes ago, ezra650 said:
Put some music on while you reload. Easy... but not so loud you can't hear the primer/powder alarm
My 650 squeaks as well. I've tried to find it a few times making sure everything was oiled/greased, but I guess it was the case shuttle. I quit worrying about it and kept loading.yeah! great idea! :DDD need to tell it to my wife (she sits near me usually)
-
On 8/2/2021 at 4:49 PM, kmcdonou said:I found my problem. The camming pin has play in it when the nut is off, Dillon or aftermarket. I moved the pin over so it wouldn't rub, and retightened the nut. Problem solved.
Can you please show on pic/video what did you do exactly..coz i have a bit of the same problem..it's not bothering me for now, but could help to solve another problem
-
Got the roller cam and a new spring and a ball combo..
Didn't help = / This thing keeps screaming in my face
Tried to put the shaft higher or lower..it just screams
It comes from the vibration of case insert slide&cam (yes, oiled)
If i push it with the finger it shuts up..but i can't come up with what could i do to make in pressed all the time
-
can't decide between a 115/131PF load and a 115/138PF load.. both at 1.157"
131 gives +30 accuracy (about 1" inch at 15y)
138 gives +20attack speed and +7dmg..but -20 accuracy
-
Sup guys
Start position: 15y
Gun: shouldered / dot on the target
Throwing there fastest splits you can do
Your honest hand on the heart: what is the average group in inches there will be and the split times ? + Bullet weight/PF if known
-
been there had that
b) / c)
2lb + fast fingering + weak grip = bump
I choose to put stronger (red) springs in my Eclipse.
+ check if your F.pin spring weared off or not..but sounds that it's not that case
-
-
1:52 nicely done
-
+1 to the side charger. When i'll be ready to spend 5k eur on "new best pcc" first of all i'll check if it's side or not..otherwise for me it's just another well tuned, woked moneycow for a year or two..
-
Can someone enlighten me please, what is the whole thing about hollow points? why does it becoming so popular and how it's better than fmj ?
-
• cleaning + oiling the right spots on the bolt
• avoiding low pf + weared off trigger group/replacing a littlef*#ker disconnector spring once a year
• replacing trigger pin + spring twice a year
as i see how to battle slamming
-
can confirm a Slamfire caused by a weak firing pin spring
-
Wow, that could be it!
-
Sure..a lot of it on the ramp and shaft not helping at all
-
Sup guys
Video attached*
For a year this dillon 750 chewbaccing my mind
• When i press this Case insert slider with my finger it stops screaming..
Should i try to sandpaper it (have tried a bit but didn't helped) or.. any ideas?
-
thanks for the topic
Cool! Thanks to your videos I understood what next upgrade is needed.. Lose some (50 kg) of weight
-
Hmmmm. 4.8 N320*115 and 132PF sounds khm suspicious..Are you shooting from 10mm caliber/ 1" barrel ?
3,8 N320*115 RN for about 135PF or so
PCC match videos
in Pistol Caliber Carbine
Posted
3:29 got some a-ta-ta-ta, or..?
4:51 proc?
would be good to add some numbers: HF / % or dunno, win by